CS4384-CQZ Cirrus Logic Inc, CS4384-CQZ Datasheet - Page 42

• Manufacturer Part Number: CS4384-CQZ
• Description: IC DAC 8CH 103DB 192KHZ 48LQFP
• Manufacturer: Cirrus Logic Inc

Specifications of CS4384-CQZ

• Data Interface: Serial
• Number Of Bits: 24
• Number Of Converters: 8
• Voltage Supply Source: Analog and Digital
• Power Dissipation (max): 520mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Resolution (bits): 24bit
• Sampling Rate: 192kSPS
• Input Channel Type: Serial
• Supply Voltage Range - Analog: 4.75V To 5.25V
• Supply Current: 83mA
• Digital Ic Case Style: QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1525 - BOARD EVAL FOR CS4384 DAC
• Settling Time: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 598-1062

42
6.9
6.9.1
6.10
6.10.1 De-Emphasis Control (PX_DEM1:0)
MUTE_B4
Reserved
7
0
7
0
Mute Control (Address 09h)
Mixing Control (Address 0Ah, 0Dh, 10h, 13h)
Function:
Auto mute polarity detect (00)
See
Active low mute polarity (10)
When RST is low the outputs are high impedance and will need to be biased active. Once reset has been
released and after this bit is set, the MUTEC output pins will be active low polarity.
Active high mute polarity (11)
At reset time the outputs are high impedance and will need to be biased active. Once reset has been re-
leased and after this bit is set, the MUTEC output pins will be active high polarity.
Mute (MUTE_xx)
Default = 0
0 - Disabled
1 - Enabled
Function:
The Digital-to-Analog converter output will mute when enabled. The quiescent voltage on the output will
be retained. The muting function is affected, similarly to attenuation changes, by the Soft and Zero Cross
bits. The MUTE pins will go active during the mute period according to the MUTEC bit.
Default = 00
00 - Disabled
01 - 44.1 kHz
10 - 48 kHz
11 - 32 kHz
Function:
Selects the appropriate digital filter to maintain the standard 15 µs/50 µs digital de-emphasis filter re-
sponse at 32, 44.1 or 48 kHz sample rates.
De-emphasis is only available in Single-Speed Mode.
Section 4.11 on page 28
MUTE_A4
Px_DEM1
6
0
6
0
MUTE_B3
Px_DEM0
5
0
5
0
for the description.
MUTE_A3
PxATAPI4
4
0
4
0
(Figure 20 on page
MUTE_B2
PxATAPI3
3
0
3
1
25)
MUTE_A2
PxATAPI2
2
0
2
0
MUTE_B1
PxATAPI1
1
0
1
0
MUTE_A1
CS4384
PxATAPI0
DS620F1
0
0
0
1