MC68020EH16E Freescale Semiconductor, MC68020EH16E Datasheet - Page 124

• Manufacturer Part Number: MC68020EH16E
• Description: IC MPU 32BIT 33MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68020EH16E

• Processor Type: M680x0 32-Bit
• Speed: 166MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 132-MQFP, 132-PQFP
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 16.67MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Supply Voltage (min): 4.75V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 132
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant

Resetting the processor causes any bus cycle in progress to terminate as if
DSACK1/DSACK0 or BERR had been asserted. In addition, the processor initializes
registers appropriately for a reset exception. Exception processing for a reset operation is
described in Section 6 Exception Processing.
When a RESET instruction is executed, the processor drives the RESET signal for 512
clock cycles. In this case, the processor resets the external devices of the system, and the
internal registers of the processor are unaffected. The external devices connected to the
RESET signal are reset at the completion of the RESET instruction. An external RESET
signal that is asserted to the processor during execution of a RESET instruction must
extend beyond the reset period of the instruction by at least eight clock cycles to reset the
processor. Figure 5-52 shows the timing information for the RESET instruction.
MOTOROLA
CYCLES
RESET
V CC
+5 V
BUS
CLK
BUS STATE UNKNOWN
Figure 5-51. Initial Reset Operation Timing
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
M68020 USER’S MANUAL
t < 4 CLOCKS
t 520 CLOCKS
ENTIRE BUS
STATED
THREE-
ALL CONTROL SIGNALS
NEGATED, DATA BUS IN
READ MODE, ADDRESS
BUS DRIVEN
4 CLOCKS
ISP
READ
STARTS
5- 77