ES1-LW100H Omron, ES1-LW100H Datasheet - Page 36

• Manufacturer Part Number: ES1-LW100H
• Description: Sensor Hardware & Accessories Infrared Sensor
• Manufacturer: Omron

Specifications of ES1-LW100H

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

36
E5@Z
Removing the Temperature Controller from the
Case
E5CZ/EZ/AZ
The Temperature Controller can be removed from the case to perform
maintenance without removing the terminal leads. This is possible for
only the E5CZ, E5AZ, and E5EZ, and not for the E5CZ-U. Check the
specifications of the case and Temperature Controller before
removing the Temperature Controller from the case.
1. Insert a flat-blade screwdriver into the two tool insertion holes (one
2. Insert the flat-blade screwdriver in the gap between the front panel
3. When inserting the E5CZ/EZ/AZ, check to make sure that the
Precautions when Wiring
Separate input leads and power lines in order to prevent external
noise.
Use wires with a gage of AWG24 (cross-sectional area:
0.205 mm
pair cable (stripping length: 5 to 6 mm).
Use crimp terminals when wiring the terminals.
Tighten the terminal screws to a torque of 0.74 to 0.90 N·m.
Use the following types of crimp terminals for M3.5 screws.
Do not remove the terminal block. Doing so may result in
malfunction or failure.
on the top and one on the bottom) to release the hooks.
and rear case, and pull out the front panel slightly. Hold the top and
bottom of the front panel and carefully pull it out toward you,
without applying unnecessary force.
sealing rubber is in place and push the E5CZ/EZ/AZ toward the
rear case until it snaps into position. While pushing the E5CZ/EZ/
AZ into place, push down on the hooks on the top and bottom
surfaces of the rear case so that the hooks are securely locked in
place. Be sure that electronic components do not come into
contact with the case.
E5CZ/CZ-U
E5EZ
2
) to AWG14 (cross-sectional area: 2.081 mm
(1)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
7.2 mm max.
7.2 mm max.
Flat-blade screwdriver
(Unit: mm)
E5AZ
2
) twisted-
(3)
(1)
(1)
(2)