ES1-LW100H Omron, ES1-LW100H Datasheet - Page 61

no-image

ES1-LW100H

Manufacturer Part Number
ES1-LW100H
Description
Sensor Hardware & Accessories Infrared Sensor
Manufacturer
Omron
Datasheet

Specifications of ES1-LW100H

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Mounting (E5EZ-PRR)
1. Insert the E5EZ-PRR into the mounting hole in the panel from the
2. Push the mounting bracket along the E5EZ-PRR body from the
3. Tighten the fixing screw on each mounting bracket alternately until
E5EZ-PRR
Removing the Temperature Controller from the
Case
To remove the Temperature Controller from case, use a suitable
Phillips screwdriver for the screw located at the bottom on the front
panel.
1. Insert the tools (see drawing above) into the slots (one on the top
2. Insert the tool in the space between the front and rear panels and
3. Match up the upper and lower claws with the connection points
4. Insert the Unit into the rear case until you hear a click. When
E5EZ-PRR
Flat-blade screwdriver
(Unit: mm)
front.
terminals up to the panel, and secure it temporarily.
the ratchet stops tightening.
and one on the bottom) and release the hooks.
slightly pull out the front panel. Hold the top and bottom of the front
panel and pull toward yourself to remove it.
and insert the Option Unit. Mount the Option Unit in the center.
inserting the Unit, press down the hooks on the top and bottom of
the rear case so that they firmly hook on the inserted Unit. Make
sure that electronic parts do not come in contact with the case.
Tool insertion hole
Mounting
bracket
Panel
(1)
(1)
(3)
(2)
Precautions when Wiring
Separate input leads and power lines in order to prevent external
noise.
Use wires with a gage of AWG24 (cross-sectional area:
0.205 mm
pair cable (stripping length: 5 to 6 mm).
Use crimp terminals when wiring the terminals.
Tighten the terminal screws to a torque of 0.74 to 0.9 N·m.
Use the following types of crimp terminals for M3.5 screws.
Do not remove the terminal block. Doing so will result in
malfunction or failure.
2
) to AWG14 (cross-sectional area: 2.081 mm
7.2 mm max.
7.2 mm max.
E5EZ-PRR
2
) twisted-
61

Related parts for ES1-LW100H