PIC16F737-I/SP Microchip Technology Inc., PIC16F737-I/SP Datasheet - Page 153

• Manufacturer Part Number: PIC16F737-I/SP
• Description: 28 PIN, 7 KB FLASH, 368 RAM, 25 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F737-I/SP

• A/d Inputs: 5-Channel, 8-Bit
• Cpu Speed: 5 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 25
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 28-pin SPDIP
• Programmable Memory: 7K Bytes
• Ram Size: 192 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

12.0
The Analog-to-Digital (A/D) Converter module has
11 inputs for the PIC16F737 and PIC16F767 devices
and 14 for the PIC16F747 AND PIC16F777 devices.
The A/D converter allows conversion of an analog input
signal to a corresponding 10-bit digital number.
A new feature for the A/D converter is the addition of
programmable acquisition time. This feature allows the
user to select a new channel for conversion and to set
the GO/DONE bit immediately. When the GO/DONE bit
is set, the selected channel is sampled for the
programmed acquisition time before a conversion is
actually started. This removes the firmware overhead
required to allow for an acquisition (sampling) period
(see Register 12-3 and Section 12.2 “Selecting and
Configuring Automatic Acquisition Time”).
 2004 Microchip Technology Inc.
ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
The module has five registers:
• A/D Result High Register (ADRESH)
• A/D Result Low Register (ADRESL)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
The ADCON0 register, shown in Register 12-1, controls
the operation of the A/D module and clock source. The
ADCON1 register, shown in Register 12-2, configures
the functions of the port pins, justification and voltage
reference
Register 12-3, configures the programmed acquisition
time.
Additional information on using the A/D module can be
found in the “PICmicro
Reference Manual” (DS33023) and in Application Note
AN546 “Using the Analog-to-Digital (A/D) Converter”
(DS00546).
sources.
The
®
PIC16F7X7
Mid-Range MCU Family
ADCON2,
DS30498C-page 151
shown
in