STM32W108CBU64TR STMicroelectronics, STM32W108CBU64TR Datasheet - Page 136

• Manufacturer Part Number: STM32W108CBU64TR
• Description: MCU, RF, 32BIT, 128K FLASH, 48VFQFPN
• Manufacturer: STMicroelectronics
• Series: STM32r

Specifications of STM32W108CBU64TR

• Controller Family/series: STM32
• Core Size: 32bit
• No. Of I/o's: 24
• Program Memory Size: 128KB
• Ram Memory Size: 8KB
• Cpu Speed: 24MHz
• Oscillator Type: Internal, External
• No. Of Timers: 2
• Rohs Compliant: Yes
• Applications: RF4CE, Remote Control
• Core Processor: ARM® Cortex-M3™
• Program Memory Type: FLASH (128 kB)
• Controller Series: STM32W
• Ram Size: 8K x 8
• Interface: I²C, SPI, UART/USART
• Number Of I /o: 24
• Voltage - Supply: 1.18 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-VFQFN Exposed Pad
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

General-purpose timers
136/209
Figure 47. Triggering timer 2 with update of Timer 1
As in the previous example, both counters can be initialized before starting counting.
Figure 46
mode instead of gated mode (TIM_SMS = 110 in the TIM2_SMCR register).
Figure 48. Triggering Timer 2 with enable of Timer 1
Starting both timers synchronously in response to an external trigger
This example, sets the enable of Timer 1 when its TI1 input rises, and the enable of Timer 2
with the enable of Timer 1. Refer to
aligned, Timer 1 must be configured in master/slave mode (slave with respect to TI1, master
with respect to Timer 2):
●
●
●
Configure Timer 1 in master mode to send its Enable as trigger output (TIM_MMS =
001 in the TIM1_CR2 register).
Configure Timer 1 slave mode to get the input trigger from TI1 (TIM_TS = 100 in the
TIM1_SMCR register).
Configure Timer 1 in trigger mode (TIM_SMS = 110 in the TIM1_SMCR register).
shows the behavior with the same configuration shown in
Doc ID 16252 Rev 8
Figure 44
for connections. To ensure the counters are
STM32W108CB, STM32W108HB
Figure
47, but in trigger