9946 3M, 9946 Datasheet - Page 3

• Manufacturer Part Number: 9946
• Description: Soldering Tools .072 HOT MELT TIP SCOTCH WELD 3PC BAG
• Manufacturer: 3M
• Type: Brass Extension Tipr

Specifications of 9946

• Tip Size: 0.072 mm
• Product: Soldering Tips
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 021200-22040

Important Safety Instructions
Read instructions thoroughly before operating or performing any maintenance on 3M™ Scotch-Weld™ Hot
Melt Applicator PG II LT.
1
Do not modify the plug provided with the 3M
Scotch-Weld Hot Melt Applicator PG II LT.
Improper grounding connection of the plug may
cause electrical shock. Check with a qualified
electrician or service person to determine whether
the plug is properly grounded.
Use only an approved extension cord with 3M
Scotch-Weld Hot Melt Applicator PG II LT. Use of
improper extension cord may cause electrical shock.
Use an extension cord that complies with NEC
requirements and state and local electrical
requirements.
Disconnect air and electrical power and make sure
applicator is at room temperature before servicing
3M Scotch-Weld Hot Melt Applicator PG II LT.
Failure to disconnect air and electrical power before
servicing may cause electrical shock or damage to
the applicator.
!
!
!
Caution
Caution
Danger
SAVE THESE INSTRUCTIONS
Contact with molten adhesive or hot applicator tip
or metal components may cause burns. Wear heat-
resistant gloves and safety glasses when operating
or repairing the 3M Scotch-Weld Hot Melt
Applicator PG II LT.
Do not connect 3M Scotch-Weld Hot Melt
Applicator PG II LT to air supply with air pressure
greater than 80 psi. Damage to the applicator may
result.
Use 3M™ Scotch-Weld™ Hot Melt LM Adhesives
only. Use of other adhesives may damage the
applicator or result in hazardous conditions.
!
!
!
Important
Important
Caution
© 3M 2006