9946 3M, 9946 Datasheet - Page 6

• Manufacturer Part Number: 9946
• Description: Soldering Tools .072 HOT MELT TIP SCOTCH WELD 3PC BAG
• Manufacturer: 3M
• Type: Brass Extension Tipr

Specifications of 9946

• Tip Size: 0.072 mm
• Product: Soldering Tips
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 021200-22040

Setup and Installation
3. Install Air Filter and
An air filter and moisture trap must be installed at the
applicator connection point of the air system. Install
an air filter WATTS #602-2S Model M4 or equivalent
at the air outlet or as close as possible to it. The hose
connection at the end of the 3M™ Scotch-Weld™
Hot Melt Applicator PG II LT air hose is 1/8’’
standard male pipe fitting.
© 3M 2006
Regulator
4. Install Bench Stand
Prior to start up in operation, set the bench stand on
work surface so that tip of the applicator points away
from work area when applicator is not in use. When
bench stand is in most desirable position, fasten
permanently using the screws provided. (If
portability of the bench stand is desired, simply
attach the stand to a piece of scrap wood
approximately 7’’ x 16’’ using either screws or by
adhering the stand to the wood.)
4