SFSA16GBQ1BR8TO-I-DT-216-STD Swissbit NA Inc, SFSA16GBQ1BR8TO-I-DT-216-STD Datasheet - Page 19

• Manufacturer Part Number: SFSA16GBQ1BR8TO-I-DT-216-STD
• Description: FLASH SSD UDMA IND 2.5" 16GB
• Manufacturer: Swissbit NA Inc
• Series: X-200r

Specifications of SFSA16GBQ1BR8TO-I-DT-216-STD

• Memory Size: 16GB
• Memory Type: FLASH - NAND
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1052-1030

6.5.28 Word 88: Ultra DMA Modes Supported and Selected
Word 88 identifies the Ultra DMA transfer modes supported by the device and indicates the mode that is
currently selected. Only one DMA mode shall be selected at any given time. If an Ultra DMA mode is selected,
then no Multiword DMA mode shall be selected. If a Multiword DMA mode is selected, then no Ultra DMA mode
shall be selected. Support of this word is mandatory if Ultra DMA is supported. Word 88 shall return a value of 0
if the device does not support UDMA.
6.5.29 Word 89: Time required for Security erase unit completion
Word 89 specifies the time required for the SECURITY ERASE UNIT command to complete. Support of this word is
mandatory if the Security feature set is supported.
Required Time=(Value*2) minutes
6.5.30 Word 92: Master Password Revision Code
Word 92 contains the value of the Master Password Revision Code set when the Master Password was last
changed. Valid values are 0001h through FFFEh. A value of 0000h or FFFFh indicates that the Master
Password Revision is not supported. Support of this word is mandatory if the Security feature set is
supported.
6.5.31 Word 128: Security status
Support of this word is mandatory if the Security feature set is supported.
Bit 8 of word 128 indicates the security level. If security mode is enabled and the security level is high, bit 8
Bit 5 of word 128 indicates the Enhanced security erase unit feature is supported. If bit 5 is set to one, the
Bit 4 of word 128 indicates that the security count has expired. If bit 4 is set to one, the security count is expired
Bit 3 of word 128 indicates security frozen. If bit 3 is set to one, the security is frozen.
Bit 2 of word 128 indicates security locked. If bit 2 is set to one, the security is locked.
Bit 1 of word 128 indicates security enabled. If bit 1 is set to one, the security is enabled.
Bit 0 of word 128 indicates the Security Mode feature set supported. If bit 0 is set to one, security is supported.
Swissbit AG
Industriestrasse 4-8
CH-9552 Bronschhofen
Switzerland
shall be cleared to zero. If security mode is enabled and the security level is maximum, bit 8 shall be set to
one. When security mode is disabled, bit 8 shall be cleared to zero.
Enhanced security erase unit feature set is supported.
and SECURITY UNLOCK and SECURITY ERASE UNIT are command aborted until a power-on reset or hardware
reset.
If bit 2 of word 86 shall be set to zero, the Drive does not support the CFA feature set.
If bit 3 of word 86 is set to one, the Advanced Power Management feature set has been enabled via the
Set Features command.
Bit 4 of word 86 shall be set to zero; the Drive does not support the Removable Media Status feature set.
Bit 15:
Bit 14: 1
Bit 13: 1
Bit 12: 1
Bit 11: 1
Bit 10: 1
Bit 9: 1
Bit 8: 1
Bit 7:
Bit 6: 1
Bit 5: 1
Bit 4: 1
Bit 3: 1
Bit 2: 1
Bit 1: 1
Bit 0: 1
Reserved
= Ultra DMA mode 6 is selected 0 = Ultra DMA mode 6 is not selected
= Ultra DMA mode 5 is selected 0 = Ultra DMA mode 5 is not selected
= Ultra DMA mode 4 is selected 0 = Ultra DMA mode 4 is not selected
= Ultra DMA mode 3 is selected 0 = Ultra DMA mode 3 is not selected
= Ultra DMA mode 2 is selected 0 = Ultra DMA mode 2 is not selected
= Ultra DMA mode 1 is selected 0 = Ultra DMA mode 1 is not selected
= Ultra DMA mode 0 is selected 0 = Ultra DMA mode 0 is not selected
Reserved
= Ultra DMA mode 6 and below are supported. Bits 0-5 shall be set to 1.
= Ultra DMA mode 5 and below are supported. Bits 0-4 shall be set to 1.
= Ultra DMA mode 4 and below are supported. Bits 0-3 shall be set to 1.
= Ultra DMA mode 3 and below are supported, Bits 0-2 shall be set to 1.
= Ultra DMA mode 2 and below are supported. Bits 0-1 shall be set to 1.
= Ultra DMA mode 1 and below are supported. Bit 0 shall be set to 1.
= Ultra DMA mode 0 is supported
Swissbit reserves the right to change products or specifications without notice.
[e-mail]
www.swissbit.com
X-200_data_sheet_SA-QxBR_Rev100.doc
Revision: 1.00
Page 19 of 47