SFSA16GBQ1BR8TO-I-DT-216-STD Swissbit NA Inc, SFSA16GBQ1BR8TO-I-DT-216-STD Datasheet - Page 6

• Manufacturer Part Number: SFSA16GBQ1BR8TO-I-DT-216-STD
• Description: FLASH SSD UDMA IND 2.5" 16GB
• Manufacturer: Swissbit NA Inc
• Series: X-200r

Specifications of SFSA16GBQ1BR8TO-I-DT-216-STD

• Memory Size: 16GB
• Memory Type: FLASH - NAND
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1052-1030

4 Product Specification
The Solid State Drive (SSD) is a small form factor (2.5’’) non-volatile memory drive which provides high capacity
data storage. It has a standard combined connector with SATA and power/control part. The card works at a
supply voltage of 5V.
The drive with the SATA interface operates in Mode 2.0 (1.5 or 3.0 Gb/s burst).
The drive has an internal intelligent controller which manages interface protocols, data storage and retrieval as
well as hardware BCH-code Error Correction Code (ECC), defect handling, diagnostics and clock control.
The wear leveling mechanism assures an equal usage of the Flash memory cells to extend the life time.
The hardware BCH-code ECC allows to detect and correct 8 random bits per 528 Bytes.
The drive has a voltage detector and a powerful power-loss management feature to prevent data corruption
after power-down.
The specification has been realized and approved by the ATA/ATAPI-7 specification.
The system highlights are shown in Table 3 …Table 10.
Related Documentation
4.1 Physical description
The SSD contains a flash controller and Flash memory modules. The controller interfaces with a host system
allowing data to be written to and read from the Flash memory modules.
The SSD is offered in a 2.5’’ size package with a standard SATA connector. Figure 1 and Figure 2
4.2 System Performance
Table 3: System Performance (measured) UDMA5
System Performance
Data transfer Rate (SATA burst (1.5 or 3.0Gb/s))
Sustained Sequential Read
128kB Block size
Sustained Sequential Write
128kB Block size
Sustained Sequential Read
4kB Block size
Sustained Sequential Write
4kB Block size
Sustained Random Read
4kB Block size
Sustained Random Write
4kB Block size
Swissbit AG
Industriestrasse 4-8
CH-9552 Bronschhofen
Switzerland
(page 39) show SSD dimensions and connector location.
1.
2.
Serial Transport Protocols and Physical Interconnect (ATA/ATAPI-7)
AT Attachment Interface Document, American National Standards Institute, X3.221-1994
All values refer to Toshiba Flash chips (see part number) in UDMA5 mode (SATA 3.0Gbit/s) with Sequential write/read test (256
sectors multiple commands) and sequential and random write/read test (8 sectors multiple commands).Sustained Speed depends
on flash type and number, file/cluster size, and burst speed.
The typical random write speed values are really random access across the whole drive. Random write values in file systems are
much larger.
Swissbit reserves the right to change products or specifications without notice.
16…32GB
8…32GB
8…32GB
8…32GB
8…32GB
8…32GB
[e-mail]
64GB
64GB
64GB
64GB
64GB
64GB
8GB
4GB
4GB
4GB
4GB
4GB
4GB
www.swissbit.com
150 or 300
0.07
0.06
107
116
49
93
26
29
19
0.05
21
12
Typ.
11
100
9
5.1
85
26
18
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)(2)
(1)
(1)(2)
(1)
(1)
X-200_data_sheet_SA-QxBR_Rev100.doc
Max.
0.08
0.10
300
0.12
100
120
105
110
90
55
30
35
30
25
25
20
13
14
10
7
Revision: 1.00
MB/s
MB/s
MB/s
Unit
Page 6 of 47