FLUKE-190-204/AM/S Fluke Electronics, FLUKE-190-204/AM/S Datasheet - Page 115

• Manufacturer Part Number: FLUKE-190-204/AM/S
• Description: SCOPEMETER 4CH 200MHZ COLOR SCC
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-204/AM/S

• Bandwidth: 200MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 1.7nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1175

Troubleshooting
The Test Tool Shuts Down After a Short Time
•
•
•
The Screen Remains Black
•
•
‘Setting the Power Down timer’.
Press
The batteries may be empty. Check the battery
symbol at the top right of the screen. A
indicates that the batteries are empty and must be
charged. Connect the BC190 power adapter.
The test tool is still on but the ‘display auto off’ timer is
active, see Chapter 6 ‘Setting the Display AUTO-off
Timer’. To turn the display on press any key (restarts
the ‘display AUTO-off’ timer), or connect the BC190
power adapter.
The power down timer is active, see Chapter 6
Make sure that the test tool is on (press
You might have a problem with the screen contrast.
Press
the arrow keys to adjust the contrast.
USER
to turn the test tool on.
, then press
F4
. Now you can use
symbol
)
•
The Test Tool Cannot Be Turned Off
If the test tool cannot be turned off due to a software
hangup, do the following:
•
FlukeView Does Not Recognize The Test Tool
•
•
•
•
The display ‘auto off’ timer is active, see Chapter 6
‘Setting the Display AUTO-off Timer’. To turn the
display on press any key (restarts the ‘display AUTO -
off’ timer), or connect the BC190 power adapter.
Keep the ON/OFF key pressed for at least 5 seconds.
Make sure that the test tool is turned on.
Make sure that the interface cable is properly
connected between the test tool and the PC. Use only
the test tool mini USB port for communication with a
computer!
Make sure that no SAVE/RECAL/COPY/MOVE action
from or to a USB-stick is being performed.
Make sure that the USB driver has been correctly
installed, see Appendix A.
Troubleshooting
107