FLUKE-190-204/AM/S Fluke Electronics, FLUKE-190-204/AM/S Datasheet - Page 53

• Manufacturer Part Number: FLUKE-190-204/AM/S
• Description: SCOPEMETER 4CH 200MHZ COLOR SCC
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-204/AM/S

• Bandwidth: 200MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 1.7nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1175

Recording Scope Waveforms In Deep
Memory (Scope Record)
The
waveform of each active input. This function can be used
to monitor waveforms like motion control signals or the
power-on event of an Uninterruptable Power Supply
(UPS). During recording, fast transients are captured.
Because of the deep memory, recording can be done for
more than one day. This function is similar to the roll mode
in many DSO’s but has deeper memory and better
functionality.
Starting a Scope Record Function
To record for example the input A and input B waveform,
do the following:
The waveform moves across the screen from right to left
like on a normal chart recorder. (See Figure 21).
1
2
3
SCOPE RECORD
Apply a signal to input A and input B.
RECORDER
ENTER
function is a roll mode that logs a long
Open the
From the Recorder main menu,
highlight Scope Record and Start
the recording.
RECORDER
main menu.
Recording Scope Waveforms In Deep Memory (Scope Record)
Observe that the screen displays the following:
•
•
Time from start at the top of the screen.
The status at the bottom of the screen which includes
the time/div setting as well as the total timespan that
fits the memory.
For accurate recordings it is advised to let the
instrument first warm up for five minutes.
Figure 21. Recording Waveforms
Note
45