FLUKE-190-204/AM/S Fluke Electronics, FLUKE-190-204/AM/S Datasheet - Page 15

• Manufacturer Part Number: FLUKE-190-204/AM/S
• Description: SCOPEMETER 4CH 200MHZ COLOR SCC
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-204/AM/S

• Bandwidth: 200MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 1.7nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1175

• Do not apply input voltages above the rating
• Do not use exposed metal BNC or banana
• Do not insert metal objects into connectors.
• Use the product only as specified, or the
• Carefully read all instructions.
• Do not use the product if it operates
• Do not use and disable the product if it is
• Keep fingers behind the finger guards on the
• Use only correct measurement category
of the instrument. Use caution when using
1:1 test leads because the probe tip voltage
will be directly transmitted to the product.
plug connectors. Fluke offers cables with
plastic, safety designed BNC connectors
suitable for the ScopeMeter product, see
Chapter 7 ‘Optional accessories’.
protection supplied by the product can be
compromised.
incorrectly.
damaged.
probes.
(CAT), voltage, and amperage rated probes,
test leads, and adapters for the measurement.
• Do not exceed the Measurement Category
• Do not use the product around explosive gas,
• Measure a known voltage first to make sure
• Examine the case before you use the product.
• Do not work alone.
• Comply with local and national safety codes.
• The battery door must be closed and locked
• Do not operate the product with covers
• Remove the input signals before you clean
• Use only specified replacement parts.
(CAT) rating of the lowest rated individual
component of a product, probe, or accessory.
vapor, or in damp or wet environments.
that the product operates correctly.
Look for cracks or missing plastic. Carefully
look at the insulation around the terminals.
Use personal protective equipment (approved
rubber gloves, face protection, and
flame resistant clothes) to prevent shock and
arc blast injury where hazardous live
conductors are exposed.
before you operate the product.
removed or the case open. Hazardous voltage
exposure is possible.
the product.
Safety Information: Read First
7