S29GL256M10TAIR10 Spansion Inc., S29GL256M10TAIR10 Datasheet - Page 113

• Manufacturer Part Number: S29GL256M10TAIR10
• Manufacturer: Spansion Inc.

Specifications of S29GL256M10TAIR10

• Cell Type: NOR
• Density: 256Mb
• Access Time (max): 100ns
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 25/24Bit
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Program/erase Volt (typ): 3/11.5 to 12.5V
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8/16Bit
• Number Of Words: 32M/16M
• Supply Current: 60mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Not Compliant

Revision A2 (February 25, 2004)
Revision A3 (February 26, 2004)
Revision A4 (March 24, 2004)
February 7, 2007 S29GL-M_00_B8
Connection Diagrams
Removed the 40-pin reverse TSOP diagram.
Updated the 48-pin standard TSOP diagram.
Removed the 48-pin reverse TSOP diagram.
Removed the 56-pin reverse TSOP diagram.
Ordering Information
Removed all references to package type R.
Autoselect Codes, (High Voltage Method)
Updated the R3, R4 column replacing -04 and -03 designators with -R4 and -R3 respectively.
Word Program Command Sequence
Included statements documenting word programming support for backward compatibility with
existing Flash drivers.
Physical Dimensions
Removed the BGA-80P-M02 diagram.
Distinctive Characteristics
Corrected typo in the Flexible
CMOS Compatible
Removed V
Erase and Program Operations-S29GL256M only
Corrected unit typos.
Erase and Program Operations-S29GL128M only
Corrected the minimum Data Setup Time.
Alternate CE# Controlled Erase and Program Operations-S29GL128M
Corrected the minimum CE# Pulse width.
TSOP Pin and BGA Package Capacitance: Pkg types TB, TC, BB, BC
Added C
Connection Diagrams
40-pin standard TSOP: Corrected pin 30 to be V
48-pin standard TSOP: Added superscripts to designators for pin 9, 13, 14, 15 and 47. Changed
pin 13 to A21. Added two notes below illustration.
56-pin standard TSOP: Added superscripts to designators for pin 1, 2 and 12. Changed pin 56 to
NC. Added three notes below illustration.
64-ball Fortified BGA: Corrected ball D8 to be V
F7, and F1. Added two notes below illustration.
63-ball Fine-pitch BGA: Added superscript to designator for Ball H7. Added one note below illus-
tration. Added connection diagrams for S29GL064M (model R0) and S29GL032M (model R0).
Pin Description
Added V
Logic Symbols
Added V
Figure 3 Write Buffer Programming Operation
Corrected the DQ locations and added callouts to notes one through three.
IN3.
IO
IO
description.
on all models except R3 and R4.
CC
from Max for V
D a t a
S29GL-M MirrorBit
OL
Se
S h e e t
.
ctor Architecture section.
TM
Flash Family
IO
IO
. Added superscripts to designators for ball D8,
.
111