NUC130RE3CN Nuvoton Technology Corporation of America, NUC130RE3CN Datasheet - Page 359

• Manufacturer Part Number: NUC130RE3CN
• Description: IC MCU 32BIT 128KB FLASH 64LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro™ NUC100r

Specifications of NUC130RE3CN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

[12]
[11]
[9]
[8]
[7]
[6]
[5]
[4]
[3]
[10]
[2]
NuMicro™ NUC130/NUC140 Technical Reference Manual
TOUT_INT
MODEM_INT
RLS_INT
THRE_INT
RDA_INT
LIN_RX_BREAK_
IF
Reserved
BUF_ERR_IF
TOUT_IF
MODEM_IF
RLS_IF
Time Out Interrupt Indicator (Read Only)
This bit is set if TOUT_IEN and TOUT_IF are both set to 1.
1 = The Tout interrupt is generated
0 = No Tout interrupt is generated
MODEM Status Interrupt Indicator (Read Only). (not available in UART2 channel)
This bit is set if MODEM_IEN and MODEM_IF are both set to 1.
1 = The Modem interrupt is generated
0 = No Modem interrupt is generated
Receive Line Status Interrupt Indicator (Read Only).
This bit is set if RLS_IEN and RLS_IF are both set to 1.
1 = The RLS interrupt is generated
0 = No RLS interrupt is generated
Transmit Holding Register Empty Interrupt Indicator (Read Only).
This bit is set if THRE_IEN and THRE_IF are both set to 1.
1 = The THRE interrupt is generated
0 = No THRE interrupt is generated
Receive Data Available Interrupt Indicator (Read Only).
This bit is set if RDA_IEN and RDA_IF are both set to 1.
1 = The RDA interrupt is generated
0 = No RDA interrupt is generated
LIN Bus RX Break Field Detected Flag (Read Only)
This bit is set when RX received LIN Break Field. If UA_IER [LIN_RX_BRK_IEN] is
enabled the LIN RX Break interrupt will be generated.
Note: This bit is read only, but can be cleared by writing ‘1’ to it.
Reserved
Buffer Error Interrupt Flag (Read Only)
This bit is set when the TX or RX FIFO overflows (TX_OVER_IF or RX_OVER_IF is
set). When BUF_ERR_IF is set, the transfer maybe is not correct. If UA_IER
[BUF_ERR_IEN] is enabled, the buffer error interrupt will be generated.
Note: This bit is cleared when both TX_OVER_IF and RX_OVER_IF are cleared.
Time Out Interrupt Flag (Read Only)
This bit is set when the RX FIFO is not empty and no activities occurred in the RX
FIFO and the time out counter equal to TOIC. If UA_IER [TOUT_IEN] is enabled, the
Tout interrupt will be generated.
Note: This bit is read only and user can read UA_RBR (RX is in active) to clear it.
MODEM Interrupt Flag (Read Only) (not available in UART2 channel)
This bit is set when the CTS pin has state change (DCTSF=1). If UA_IER
[MODEM_IEN] is enabled, the Modem interrupt will be generated.
Note: This bit is read only and reset to 0 when bit DCTSF is cleared by a write 1 on
DCTSF.
Receive Line Interrupt Flag (Read Only).
This bit is set when the RX receive data have parity error, framing error or break error
- 359 -
Publication Release Date: June 14, 2011
Revision V2.01