TMP86xy45UG Toshiba, TMP86xy45UG Datasheet - Page 31

• Manufacturer Part Number: TMP86xy45UG
• Manufacturer: Toshiba

Specifications of TMP86xy45UG

• Package: QFP44
• Rom Types (m=mask,p=otp,f=flash): M/P
• Rom Size: 8
• Ram Size: 256
• Driver Led: 19
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: -
• I2c/sio Channels: -
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 8
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: -
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 35
• Power Supply (v): 2.7 to 5.5

2.2 System Clock Controller
2.2.4.2
interrupts. The following status is maintained during these modes.
IDLE1/2 mode and SLEEP1/2 mode
IDLE1/2 and SLEEP1/2 modes are controlled by the system control register 2 (SYSCR2) and maskable
1. Operation of the CPU and watchdog timer (WDT) is halted. On-chip peripherals continue to
2. The data memory, CPU registers, program status word and port output latches are all held in the
3. The program counter holds the address 2 ahead of the instruction which starts these modes.
operate.
status in effect before these modes were entered.
Figure 2-10 IDLE1/2 and SLEEP1/2 Modes
release mode
Normal
“0”
No
Execution of the instruc-
IDLE1/2 and SLEEP1/2
modes start instruction
CPU and WDT are halted
tion which follows the
Starting IDLE1/2 and
SLEEP1/2 modes by
Interrupt processing
Interrupt request
Page 20
Reset input
instruction
IMF
Yes
No
“1” (Interrupt release mode)
Yes
Reset
TMP86C845UG