LSM320HAY30 STMicroelectronics, LSM320HAY30 Datasheet - Page 38

• Manufacturer Part Number: LSM320HAY30
• Description: Mems Motion Sensor Module 3d Digital Accelerometer And 2d Pitch And Yaw Analog Gyroscope
• Manufacturer: STMicroelectronics

Register description
8.19
8.20
38/42
Table 49.
Interrupt 2 source register. Read-only register.
Reading at this address clears the LA_INT2_SRC IA bit (and the interrupt signal on INT 2
pin) and allows the refreshing of data in the LA_INT2_SRC register if the latched option was
chosen.
LA_INT2_THS (36h)
Table 50.
Table 51.
LA_INT2_DURATION (37h)
Table 52.
Table 53.
The D6 - D0 bits set the minimum duration of the Interrupt 2 event to be recognized.
Duration time steps and maximum values depend on the ODR chosen.
IA
ZH
ZL
YH
YL
XH
XL
THS6 - THS0
D6 - D0
0
0
Interrupt active. Default value: 0
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
Z High. Default value: 0
(0: no interrupt, 1: Z High event has occurred)
Z Low. Default value: 0
(0: no interrupt; 1: Z Low event has occurred)
Y High. Default value: 0
(0: no interrupt, 1: Y High event has occurred)
Y Low. Default value: 0
(0: no interrupt, 1: Y Low event has occurred)
X High. Default value: 0
(0: no interrupt, 1: X High event has occurred)
X Low. Default value: 0
(0: no interrupt, 1: X Low event has occurred)
LA_INT2_SRC description
LA_INT2_THS register
LA_INT2_THS description
LA_INT2_DURATION register
LA_INT2_DURATION description
THS6
D6
Interrupt 1 threshold. Default value: 000 0000
Duration value. Default value: 000 0000
THS5
D5
Doc ID 16917 Rev 1
THS4
D4
THS3
D3
THS2
D2
THS1
D1
LSM320HAY30
THS0
D0