MBM29PL160TD Fujitsu Microelectronics, Inc., MBM29PL160TD Datasheet - Page 24

• Manufacturer Part Number: MBM29PL160TD
• Description: 16m 2m X 8/1m X 16 Bit
• Manufacturer: Fujitsu Microelectronics, Inc.

24
MBM29PL160TD
Notes: 1. Minimum DC voltage on input or l/O pins are –0.5 V. During voltage transitions, inputs may negative
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
ABSOLUTE MAXIMUM RATINGS
Storage Temperature .................................................................................................. –55°C to + 125°C
Ambient Temperature with Power Applied .................................................................. –40°C to +85°C
Voltage with respect to Ground All pins except A
V
A
RECOMMENDED OPERATING RANGES
Ambient Temperature (T
V
Operating ranges define those limits between which the functionality of the device is quaranteed.
CC
9
CC
MBM29PL160TD/BD-75 ...........................................................................–20°C to +70°C
MBM29PL160TD/BD-90 ...........................................................................–40°C to +85°C
MBM29PL160TD/BD-75/90 ......................................................................+2.7 V to +3.6 V
, OE, and RESET (Note 2) ...................................................................................... –0.5 V to +13.0 V
(Note 1) ................................................................................................................ –0.5 V to +4.0 V
Supply Voltages
2. Minimum DC input voltage on A
overshoot V
During voltage transitions,outputs may positive overshoot to V
and RESET pins may negative overshoot V
voltage on A
up to 20 ns. Voltage difference between input voltage and supply voltage (V
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
semiconductor device. All the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
SS
9
, OE, and RESET pins are +13.0 V which may positive overshoot to 13.5 V for periods of
to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and l/O pins are 6.0V.
A
)
-75/-90
9
, OE, and RESET pins are –0.5 V. During voltage transitions, A
/MBM29PL160BD
9
, OE, and RESET (Note 1) ............ –0.5 V to +5.5 V
SS
to –2.0 V for periods of up to 20 ns. Maximum DC input
CC
+2.0 V for periods of up to 20 ns.
IN
-75/-90
– V
CC
) do not exceed 9 V.
9
, OE,