SCA05010-BFN-LNN Shelly, Inc., SCA05010-BFN-LNN Datasheet - Page 24

• Manufacturer Part Number: SCA05010-BFN-LNN
• Description: Innovative Display Technologies 17171 Murphy Avenue
• Manufacturer: Shelly, Inc.

excessive shocks to the module or making any alterations or modifications to it.
- Do not alter, modify or change the shape of the tab on the metal frame.
components to be attached.
iron.
Storage Precautions
between 0 C and 35 C.
them in the container in which they were shipped).
Others
defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated
if the module is subject to a low temperature.
display patterns may remain on the screen as ghost images and a slight contrast irregularity may also
appear. A normal operating status can be regained by suspending use for some time. It should be noted
that this phenomenon does not adversely affect performance reliability.
static electricity etc., exercise care to avoid holding the following sections when handling the modules.
（13）Since LCM has been assembled and adjusted with a high degree of precision, avoid applying
-Terminal electrode sections.
- Do not make extra holes on the printed circuit board, modify its shape or change the positions of
- Do not damage or modify the pattern writing on the printed circuit board.
- Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
- Except for soldering the interface, do not make any alterations or modifications with a soldering
- Do not drop, bend or twist LCM.
When storing the LCD modules, the following precaution is necessary.
(1) Store them in a sealed polyethylene bag. If properly sealed, there is no need for the dessicant.
(2) Store them in a dark place. Do not expose to sunlight or fluorescent light, keep the temperature
(3) The polarizer surface should not come in contact with any other objects. (We advise you to store
Liquid crystals solidify under low temperature (below the storage temperature range) leading to
If the LCD modules have been operating for a long time showing the same display patterns, the
To minimize the performance degradation of the LCD modules resulting from destruction caused by
- Exposed area of the printed circuit board.
24 |
P a g e