bsv-1.5s12r0h XP Power Limited, bsv-1.5s12r0h Datasheet - Page 19

• Manufacturer Part Number: bsv-1.5s12r0h
• Description: Pol Dc-dc Converter
• Manufacturer: XP Power Limited

8-4. Sensing function
8-5. P-Good Function
attention is required for wiring because the sensing line is a part of the feedback loop, and it is very sensitive. Please wire
+Sense and –Sense close together to the load.
sensing function.
This terminal is open-drain. If using P-Good function, please use P-Good terminal
connecting the resistor outside and pulling-up to the input voltage.
within this range, it may become low.
An excellent load regulation characteristic can be obtained by using the sensing function on the load side. Enough
Please connect the +Vout Pin and +Sense Pin, -Vout Pin and –Sense Pin respectively on the PCB when not using the
By utilizing this P-Good pin, the output condition of the converter can be obtained.
It will be open by
However, under the conditions written below, even if the output voltage is
- When the input voltage is below 3V
- When the output current is at over-current state.
- When the IC temperature is above 100°C
|Output voltage-Set voltage|≦0.2V typ.
DC-DC Converter
The Fifth Generation, Ultra Small Size, Isolated DC-DC Converter
47KΩ
BSV-H22A Series
P-
Good
+Vin
1
2
GND 5,8
BDD20080618
8