bsv-1.5s12r0h XP Power Limited, bsv-1.5s12r0h Datasheet - Page 8

• Manufacturer Part Number: bsv-1.5s12r0h
• Description: Pol Dc-dc Converter
• Manufacturer: XP Power Limited

for wiring because the sensing line is a part of the feedback loop, and it is very sensitive. Please wire +Sense
and -Sense close together to the load.
This terminal is open-drain. If using P-Good function, please use P-Good terminal
connecting the resistor outside and pulling-up to the input voltage.
within this range, it may become low.
8-4. Sensing function
8-5. P-Good Function
Bellnix DC-DC CONVERTERS
An excellent load regulation characteristic can be obtained by using the sensing function on the load side. Enough attention is required
Please connect the +Vout Pin and +Sense Pin , -Vout Pin and -Sense Pin respectively on the PCB when not using the sensing function.
By utilizing this P-Good pin, the output condition of the converter can be obtained.
It will be open by
However, under the conditions written below, even if the output voltage is
|Output voltage-Set voltage| ≦0.2V typ.
- When the input voltage is below 3V
- When the output current is at over-current state.
- When the IC temperature is above 100°C
High-Speed Response, Output Set Accuracy±1%
47KΩ
POL DC-DC Converter
P-
Good
+Vin
1
2
GND 5,8
BDD20080825
BSV-H Series
8