lan9218i Standard Microsystems Corp., lan9218i Datasheet - Page 27

• Manufacturer Part Number: lan9218i
• Description: Lan9218i High-performance Single-chip 10/100 Ethernet Controller With Hp Auto-mdix And Industrial Temperature Support
• Manufacturer: Standard Microsystems Corp.

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support
Datasheet
SMSC LAN9218i
Reserved
FIELD
FIELD
30:0
2:1
31
3
0
Filter 3 Offset
The Filter i Byte Mask defines which incoming frame bytes Filter i will examine to determine whether
or not this is a wake-up frame.
The Filter i command register controls Filter i operation.
The Filter i Offset register defines the offset in the frame’s destination address field from which the
frames are examined by Filter i.
DESCRIPTION
Must be zero (0)
Byte Mask: If bit j of the byte mask is set, the CRC machine processes byte number pattern - (offset
+ j) of the incoming frame. Otherwise, byte pattern - (offset + j) is ignored.
DESCRIPTION
Address Type: Defines the destination address type of the pattern. When bit is set, the pattern
applies
only to multicast frames. When bit is cleared, the pattern applies only to unicast frames.
RESERVED
Enable Filter: When bit is set, Filter i is enabled, otherwise, Filter i is disabled.
Command
Filter 3
Filter 1 CRC-16
Filter 3 CRC-16
Table 3.2 Wake-Up Frame Filter Register Structure
Reserved
Table 3.3 Filter i Byte Mask Bit Definitions
Table 3.4 Filter i Command Bit Definitions
Filter 2 Offset
FILTER I BYTE MASK DESCRIPTION
Command
Table
FILTER i COMMANDS
Table 3.5
Filter 2
Filter 0 Byte Mask
Filter 1 Byte Mask
Filter 2 Byte Mask
Filter 3 Byte Mask
DATASHEET
3.3, describes the byte mask’s bit fields.
27
describes the Filter i Offset bit fields.
Reserved
Filter 1Offset
Table 3.4
Command
Filter 1
Filter 0 CRC-16
Filter 2 CRC-16
shows the Filter I command register.
Reserved
Filter 0 Offset
Revision 2.3 (08-06-08)
Command
Filter 0