S29GL032N SPANSION [SPANSION], S29GL032N Datasheet - Page 61

• Manufacturer Part Number: S29GL032N
• Description: 64 Megabit, 32 Megabit 3.0-Volt only Page Mode Flash Memory Featuring 110 nm MirrorBit Process Technology
• Manufacturer: SPANSION [SPANSION]

11. Absolute Maximum Ratings
12. Operating Ranges
November 16, 2007 S29GL-N_01_09
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may overshoot V
2. Minimum DC input voltage on pins A9, OE#, ACC, and RESET# is –0.5 V. During voltage transitions, A9, OE#, ACC, and RESET# may
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
Notes
1. Operating ranges define those limits between which the functionality of the device is guaranteed.
2. V
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current
Ambient Temperature (T
Supply Voltages
20 ns. See
to V
overshoot V
+12.5 V which may overshoot to +14.0V for periods up to 20 ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
IO
CC
input voltage always must be lower than V
+ 2.0 V for periods up to 20 ns. See
Figure
SS
to –2.0 V for periods of up to 20 ns. See
11.1. Maximum DC voltage on input or I/Os is V
A
), Industrial (I) Devices
D a t a
+2.0 V
+0.5 V
Figure 11.1 Maximum Negative Overshoot Waveform
+0.8 V
–0.5 V
–2.0 V
Figure 11.2 Maximum Positive Overshoot Waveform
2.0 V
V
V
V
V
S29GL-N MirrorBit
CC
IO
CC
CC
for full voltage range
Parameter
S h e e t
Figure
Parameter
CC
input voltage.
11.2.
V
A9, OE#, ACC and RESET#
All other pins
(Note 3)
20 ns
20 ns
Figure
CC
®
Flash Family
(Note 1)
11.1. Maximum DC input voltage on pin A9, OE#, ACC, and RESET# is
CC
+ 0.5 V. During voltage transitions, input or I/O pins may overshoot
(Note 1)
20 ns
20 ns
20 ns
20 ns
(Note 2)
SS
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5 V to +12.5 V
–0.5 V to V
200 mA
to –2.0 V for periods of up to
+2.7 V to +3.6 V
–40°C to +85°C
+1.65 to +3.6 V
Range
Rating
CC
+0.5 V
61