LUPA-4000 CYPRESS [Cypress Semiconductor], LUPA-4000 Datasheet - Page 9

• Manufacturer Part Number: LUPA-4000
• Description: 4M Pixel CMOS Image Sensor
• Manufacturer: CYPRESS [Cypress Semiconductor]

2.3 Features and general specifications
Feature
Electronic shutter type
Windowing (ROI)
Sub-sampling and binning
modes
Read out direction
Extended dynamic range
Analog output
Digital output
Supply voltage VDD
Logic levels
Operational temperature range
Interface
Package
Power dissipation
Mass
Output amplifiers
External output load
Number of outputs
Contact:
Cypress Semiconductor Corporation
LUPA-4000
Data Sheet
[e-mail]
Table 3: Features and general specifications
Document #: 38-05712 Rev.**(Revision 1.2 )
Specification/Description
Full snapshot shutter (integration during read out is possible).
Randomly programmable ROI read out.
2:1 subsampling and voltage averaging is possible (only in the X-
direction).
Read out direction can be reversed in X and Y.
Multiple slope (up to 90 dB optical dynamic range).
The output rate of 66 Mpixels/s can be achieved with either 1 or 2
analog outputs.
2 on-chip 10-bit ADC’s @ 33 Msamples/s.
Nominal 2.5V (some supplies require 3.3V).
3.3V.
0°C to 60°C; with degradation of dark current.
Serial-to Parallel Interface (SPI).
127 pin PGA package
<200mW
<100g
Differential
R > 10 k
C < 20 pF (<10 pF is advised)
1 at 66 Mpixels/sec
2 at 33Mpixels/sec
3901 North First Street
Ω
San Jose, CA 95134
Page 9 of 49
408-943-2600