M58WR032FB60ZB6 STMICROELECTRONICS [STMicroelectronics], M58WR032FB60ZB6 Datasheet - Page 69

• Manufacturer Part Number: M58WR032FB60ZB6
• Description: 32 Mbit (2Mb x 16, Multiple Bank, Burst) 1.8V Supply Flash Memory
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

APPENDIX C. FLOWCHARTS AND PSEUDO CODES
Figure 22. Program Flowchart and Pseudo Code
Note: 1. Status check of SR1 (Protected Block), SR3 (V
2. If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.
3. Any address within the bank can equally be used.
Write 40h or 10h (3)
after a sequence.
Write Address
Read Status
Register (3)
SR7 = 1
SR3 = 0
SR4 = 0
SR1 = 0
& Data
Start
End
YES
YES
YES
YES
NO
NO
NO
NO
Program to Protected
Block Error (1, 2)
V PP Invalid
Error (1, 2)
Error (1, 2)
Program
PP
Invalid) and SR4 (Program Error) can be made after each program operation or
program_command (addressToProgram, dataToProgram) {:
if (status_register.SR3==1) /*V PP invalid error */
if (status_register.SR4==1) /*program error */
if (status_register.SR1==1) /*program to protect block error */
}
do {
error_handler ( ) ;
error_handler ( ) ;
error_handler ( ) ;
"
"
writeToFlash (addressToProgram, 0x40);
/*writeToFlash (addressToProgram, 0x10);*/
writeToFlash (addressToProgram, dataToProgram) ;
/*Memory enters read status state after
the Program Command*/
} while (status_register.SR7== 0) ;
status_register=readFlash (addressToProgram);
/* E or G must be toggled*/
M58WR032FT, M58WR032FB
"see note (3)";
/*see note (3)*/
AI06170b
69/86