PIC24FJ32GB002-E/ML MICROCHIP [Microchip Technology], PIC24FJ32GB002-E/ML Datasheet - Page 205

• Manufacturer Part Number: PIC24FJ32GB002-E/ML
• Description: 28/44-Pin, 16-Bit, Flash Microcontrollers with USB On-The-Go (OTG) and nanoWatt XLP Technology
• Manufacturer: MICROCHIP [Microchip Technology]

REGISTER 18-2:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13-12
bit 11
bit 10
bit 9-0
Note 1:
UOWN
R/W-x
R/W-x
BC7
This bit is ignored unless DTSEN = 1.
UOWN: USB Own bit
0 = The microcontroller core owns the BD and its corresponding buffer. The USB module ignores all
DTS: Data Toggle Packet bit
1 = Data 1 packet
0 = Data 0 packet
Reserved Function: Maintain as ‘0’
DTSEN: Data Toggle Synchronization Enable bit
1 = Data toggle synchronization is enabled; data packets with incorrect sync value will be ignored
0 = No data toggle synchronization is performed
BSTALL: Buffer Stall Enable bit
1 = Buffer STALL enabled; STALL handshake issued if a token is received that would use the BD in
0 = Buffer STALL disabled
BC<9:0>: Byte Count bits
This represents the number of bytes to be transmitted or the maximum number of bytes to be received
during a transfer. Upon completion, the byte count is updated by the USB module with the actual
number of bytes transmitted or received.
DTS
R/W-x
R/W-x
BC6
other fields in the BD.
the given location (UOWN bit remains set, BD value is unchanged); corresponding EPSTALL bit
will get set on any STALL handshake
BDnSTAT: BUFFER DESCRIPTOR n STATUS REGISTER PROTOTYPE, CPU
MODE (BD0STAT THROUGH BD63STAT)
(1)
W = Writable bit
‘1’ = Bit is set
R/W-x
R/W-x
BC5
0
(1)
R/W-x
R/W-x
BC4
PIC24FJ64GB004 FAMILY
0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
DTSEN
R/W-x
R/W-x
BC3
BSTALL
R/W-x
R/W-x
BC2
x = Bit is unknown
R/W-x
R/W-x
BC9
BC1
DS39940D-page 205
R/W-x
R/W-x
BC8
BC0
bit 8
bit 0