OX16C950 OXFORD [Oxford Semiconductor], OX16C950 Datasheet - Page 39

no-image

OX16C950

Manufacturer Part Number
OX16C950
Description
High Performance UART with 128 byte FIFOs
Manufacturer
OXFORD [Oxford Semiconductor]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
OX16C950-PCC60-A
Manufacturer:
Omnivision
Quantity:
1 831
Part Number:
OX16C950-TQBG
Manufacturer:
SAMSUNG
Quantity:
450
Part Number:
OX16C950-TQC60B
Manufacturer:
HITACHI
Quantity:
622
15.12
The GDS register is located at offset 0x10 of the ICR
Good data status is set when the following conditions are
true:
GDS[0]: Good Data Status
GDS[7:1]: Reserved
15.13
The DMS register is located at offset 0x11 of the ICR. This
allows the TXRDY# and RXRDY# lines to be permanently
deasserted, and the current internal status to be monitored.
This mainly has applications for testing.
DMS[0]: RxRdy Status
Read Only: set when RxRdy is asserted (pin driven low).
DMS[1]: TxRdy Status
Read Only: set when TxRdy is asserted (pin driven low).
DMS[5:2] Reserved
DMS[6]: Force RxRdy Inactive
logic 0 ⇒
Data Sheet Revision 1.2
OXFORD SEMICONDUCTOR LTD.
Good-data status register ‘GDS’
DMA Status Register ‘DMS’
ISR reads level0 (no interrupt), level2 or 2a
(receiver data) or level3 (THR empty) interrupt.
LSR[7] is clear i.e. no parity error, framing error
or break in the FIFO.
LSR[1] is clear i.e. no overrun error has occurred.
RxRdy# acts normally
logic 1 ⇒
DMA[7]: Force TxRdy Inactive
logic 0 ⇒
logic 1 ⇒
15.14
The PIX register is located at offset 0x12 of the ICR. This
read-only register gives the UART index. For a single
channel device such as the OX16C950 this reads ‘0’.
15.15
The CKA register is located at offset 0x13 of the ICR. This
register adds additional clock control mainly for
isochronous and embedded applications. The register is
effectively an enhancement to the CKS register.
This register is cleared to 0x00 after a hardware reset to
maintain compatibility with 16C550, but is unaffected by
software reset. This allows the user to select a clock mode
and then reset the channel to work-around any timing
glitches.
Port Index Register ‘PIX’
Clock Alteration Register ‘CKA’
RxRdy# is permanently inactive (high)
regardless of FIFO thresholds
TxRdy# acts normally
TxRdy# is permanently inactive (high)
regardless of FIFO thresholds.
OX16C950 rev B
Page 39

Related parts for OX16C950