MCIMX6S6AVM08AB Freescale Semiconductor, MCIMX6S6AVM08AB Datasheet - Page 17

• Manufacturer Part Number: MCIMX6S6AVM08AB
• Description: Processors - Application Specialized i.MX6 Solo rev 1.1
• Manufacturer: Freescale Semiconductor
• Type: Automotive and Infotainment Processorsr

Specifications of MCIMX6S6AVM08AB

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 800 MHz
• Instruction / Data Cache Memory: 32 KB
• Data Ram Size: 128 KB
• Data Rom Size: 96 KB
• Operating Supply Voltage: 1.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: BGA 2240
• Interface Type: I2S, SSI, AC97, ESAI, UARTS, eCSPI, I2C, Ethernet, PWM, SJC, GPIO, KPP, SPDIF
• Memory Type: DDR3
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

Freescale Semiconductor
Block Mnemonic
TEMPMON
USBOH3
UART-1
UART-2
UART-3
UART-4
UART-5
TZASC
VDOA
SSI-1
SSI-2
SSI-3
i.MX 6Solo/6DualLite Automotive and Infotainment Applications Processors, Rev. 1
I2S/SSI/AC97 Interface
OTG and 3x HS Hosts
Temperature Monitor
USB 2.0 High Speed
Trust-Zone Address
Space Controller
UART Interface
Block Name
VDOA
Table 2. i.MX 6Solo/6DualLite Modules List (continued)
System Control
Subsystem
Connectivity
Connectivity
Connectivity
Peripherals
Peripherals
Peripherals
Peripherals
Peripherals
Multimedia
Security
The SSI is a full-duplex synchronous interface, which is
used on the AP to provide connectivity with off-chip
audio peripherals. The SSI supports a wide variety of
protocols (SSI normal, SSI network, I2S, and AC-97), bit
depths (up to 24 bits per word), and clock / frame sync
options.
The SSI has two pairs of 8x24 FIFOs and hardware
support for an external DMA controller in order to
minimize its impact on system performance. The
second pair of FIFOs provides hardware interleaving of
a second audio stream that reduces CPU overhead in
use cases where two time slots are being used
simultaneously.
The Temperature sensor IP is used for detecting die
temperature. The temperature read out does not reflect
case or ambient temperature. It reflects the temperature
in proximity of the sensor location on the die.
Temperature distribution may not be uniformly
distributed, therefore the read out value may not be the
reflection of the temperature value of the entire die.
The TZASC (TZC-380 by ARM) provides security
address region control functions required for intended
application. It is used on the path to the DRAM
controller.
Each of the UARTv2 modules support the following
serial data transmit/receive protocols and
configurations:
USBOH3 contains:
Video Data Order Adapter (VDOA): used to re-order
video data from the “tiled” order used by the VPU to the
conventional raster-scan order needed by the IPU.
• 7- or 8-bit data words, 1 or 2 stop bits, programmable
• Programmable baud rates up to 4 MHz. This is a
• 32-byte FIFO on Tx and 32 half-word FIFO on Rx
• IrDA 1.0 support (up to SIR speed of 115200 bps)
• Option to operate as 8-pins full UART, DCE, or DTE
• One high-speed OTG module with integrated HS
• One high-speed Host module with integrated HS
• Two identical high-speed Host modules connected to
parity (even, odd or none)
higher max baud rate relative to the 1.875 MHz,
which is stated by the TIA/EIA-232-F standard and
the i.MX31 UART modules.
supporting auto-baud
USB PHY
USB PHY
HSIC USB ports.
Brief Description
Modules List
17