TLE6361G Infineon Technologies, TLE6361G Datasheet - Page 5

• Manufacturer Part Number: TLE6361G
• Description: IC PS SYSTEM MULTI VOLT PDSO-36
• Manufacturer: Infineon Technologies
• Type: Step-Down (Buck)r

Specifications of TLE6361G

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 4
• Voltage - Output: 5.4 ~ 6.05 V
• Current - Output: 1.5A
• Frequency - Switching: 370kHz
• Voltage - Input: 5.5 ~ 60 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-36
• Output Voltage: 5.5 V
• Output Current: 1.5 A
• Input Voltage Max: 60 V
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 150 C
• Output Voltage Tolerance: +/- 10 %
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Power - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000013297; TLE6361GNT; TLE6361GT

1.4
Pin No.
11
12
13
14
15
16
17
20
21
22
23
24
25, 26
Data Sheet, Rev. 2.0
Pin definitions and functions (cont’d)
Symbol
Q_T4
Q_T5
Q_T6
Q_LDO3
R3
R2
R1
C-
C+
CCP
SEL
Q_LDO2
FB/L_IN
Function
Voltage Tracker Output T4 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Tracker Output T5 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Tracker Output T6 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Regulator Output 3; 5V or 3.3V output; ouput voltage
is selected by pin SEL (see also 3.4.2); For stability a ceramic
capacitor of 470nF to GND is sufficient.
Reset output 3, undervoltage detection for output Q_LDO3;
open collector output; an external pullup resistor of 10k
required
Reset output 2, undervoltage detection for output Q_LDO2;
open collector output; an external pullup resistor of 10k
required
Reset output 1, undervoltage detection for output Q_LDO1 and
watchdog failure reset; open collector output ; an external pullup
resistor of 10k is required
Charge pump capacitor connection; Add the fly-capacitor of
100nF between C+ and C-
Charge pump capacitor connection; Add the fly-capacitor of
100nF between C+ and C-
Charge Pump Storage Capacitor Output; Add the storage
capacitor of 220nF between pin CCP and GND.
Select Pin for output voltage adjust of Q_LDO2 and Q_LDO3
(see also 2.2.2)
Voltage Regulator Output 2; 3.3V or 2.6V output; output
voltage is selected by pin SEL (see also 3.4.2); For stability a
ceramic capacitor of 470nF to GND is sufficient.
Feedback and Linear Regulator Input; input connection for
the Buck converter output
5
TLE 6361 G
2005-03-01
is
is