CDB5467U Cirrus Logic Inc, CDB5467U Datasheet - Page 21

• Manufacturer Part Number: CDB5467U
• Description: BOARD EVAL FOR CS5467 ADC
• Manufacturer: Cirrus Logic Inc
• Type: A/Dr

Specifications of CDB5467U

• Main Purpose: Power Management, Energy/Power Meter
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CS5467
• Primary Attributes: Watt-Hour Meter
• Secondary Attributes: Graphical User Interface, SPI™ & USB Interfaces
• Product: Data Conversion Development Tools
• Maximum Clock Frequency: 4 MHz
• Interface Type: USB
• Supply Voltage (max): 5 V
• Supply Voltage (min): 3.3 V
• For Use With/related Products: CS5467
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1555; CDB-5467U

2.8.7.3
This box allows the user to select the type of windowing algorithm for FFT processing. Windowing algo-
rithms include the Blackman, Blackman-Harris, Hanning, 5-term Hodie, and 7-term Hodie. The 5-term
Hodie and 7-term Hodie are windowing algorithms developed at Crystal Semiconductor.
2.8.7.4
This field determines the "bin width" when plotting histograms of the collected data. Each vertical bar in
the histogram plot will contain the number of output codes entered in this field. Increasing this number
may allow the user to view histograms with larger input ranges.
2.8.7.5
These two check boxes allow the user to select the data types that will be collected and returned to the
PC for processing.
2.8.7.6
The value in the Cycle Count field will be written to the Cycle Count register in the CS5467. The Cycle
Count register determines the length of one computation cycle. The Cycle Count value should be selected
appropriately according to the Data to Collect setting. For example, if the Data to Collect is instantaneous
current, voltage, or power it is better to set Cycle Count to 1.
2.8.7.7
When this button is pressed, the current settings will be saved, and the user will return to the Data Col-
lection Window.
2.8.8
To collect a sample data set:
2.8.9
The CDB5467U software allows the user to save data to a file, and retrieve it later when needed. To load
a previously saved file:
DS714DB1
1. In the Data Collection Window, press the Config button to bring up the Configuration window and view the
2. Select the appropriate settings from the available options (see the Configuration Window section) and press
3. The Data Collection Window should still be visible. Press the Collect button to begin collecting data.
4. Once the data has been collected, it can be analyzed, printed, or saved to disk.
1. Pull down the Setup menu and select the Disk menu item. A file menu will appear.
2. Find the data file in the list and select it. Press the Select button to return.
3. Go to the Data Collection Window, and press the Collect button.
4. The data from the file should appear on the screen. The data will be ready for different types of analysis.
5. To select a different file, repeat the procedure.
current settings.
the Accept button.
Collecting Data Sets
Retrieving Saved Data From a File
FFT Window
Histogram Bin Width
Data to Collect
Cycle Count
Accept Button
CDB5467U
21