CDB42L51 Cirrus Logic Inc, CDB42L51 Datasheet - Page 69

• Manufacturer Part Number: CDB42L51
• Description: BOARD EVAL FOR CS42L51 CODEC
• Manufacturer: Cirrus Logic Inc

Specifications of CDB42L51

• Main Purpose: Audio, CODEC
• Embedded: Yes, Other
• Utilized Ic / Part: CS42L51, CS8406, CS8415
• Primary Attributes: Stereo, Digital Audio Transmitter and Receiver
• Secondary Attributes: Graphic User Interface, S/PDIF Interface
• Description/function: Audio CODECs
• Operating Supply Voltage: 5 V
• Product: Audio Modules
• For Use With/related Products: CS42L51
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1005

DS679F1
6.21
Note: The DATA_SEL[1:0] bits in reg09h must be set to ‘01’b to enable function control in this register.
LIMIT_EN
7
Limiter Release Rate Register (Address 1Ah)
Peak Detect and Limiter Enable (LIMIT_EN)
Default: 0
0 - Disabled
1 - Enabled
Function:
Limits the maximum signal amplitude to prevent clipping when this function is enabled. Peak Signal Limiting
is performed by digital attenuation. Note: When the limiter is enabled, the AOUT Volume is automatically
controlled and should not be adjusted manually. Alternative volume control may be realized using the
PCMMIXx_VOL[6:0] bits.
Peak Signal Limit All Channels (LIMIT_ALL)
Default: 1
0 - Individual Channel
1 - Both channel A & B
Function:
When set to 0, the peak signal limiter will limit the maximum signal amplitude to prevent clipping on the spe-
cific channel indicating clipping. The other channels will not be affected.
When set to 1, the peak signal limiter will limit the maximum signal amplitude to prevent clipping on both
channels in response to any single channel indicating clipping.
Limiter RELEASE Rate (RRATE[5:0])
Default: 111111
Function:
Sets the rate at which the limiter releases the digital attenuation from levels below the minimum setting in
the limiter threshold register, and returns the analog output level to the AOUTx_VOL[7:0] setting.
The limiter release rate is user selectable but is also a function of the sampling frequency, Fs, and the
DAC_SZC setting unless the disable bit is enabled.
Binary Code
000000
LIMIT_ALL
111111
···
6
RRATE5
5
Slowest Release
Fastest Release
Release Time
···
RRATE4
4
RRATE3
3
RRATE2
2
RRATE1
1
CS42L51
RRATE0
0
69