DEMOBOARD TLE 6244X Infineon Technologies, DEMOBOARD TLE 6244X Datasheet - Page 43

• Manufacturer Part Number: DEMOBOARD TLE 6244X
• Description: BOARD DEMO FOR TLE 6244X
• Manufacturer: Infineon Technologies

Specifications of DEMOBOARD TLE 6244X

• Main Purpose: Power Management, Low Side Driver (Internal FET)
• Embedded: No
• Utilized Ic / Part: TLE6244
• Primary Attributes: 18 Channel Internal Switch
• Secondary Attributes: Overvoltage, Short-Circuit & Thermal Protection
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DEMOBOARDTLE6244XIN

Final Data Sheet
Outputs Low Side Switches
Ground Current
Inputs of the Power Switches, SPI Inputs, Reset and Shut-off of the Power Stages
Pin RST
ground currents I
Static voltage (without destruction) OUT1...6
Dynamic voltage without destruction after ISO/DIS7637-1, pulses 1 to 4
OUT1 to 6, OUT9 to16: via external load (e.g. 2W lamp)
OUT7, OUT8, OUT17 and OUT18: via external load
Attention: Even if all ground pins are connected with each other on the PCB the total
The 4 ground pins GND1...4 are internally connected to the heat sink via an unspecified
rivet joint. Therefore it is advisable to short-circuit the 4 ground pins on the PCB and to
connect them with the heat sink. In addition the 4 ground pins GND5..8 must be connected
to the other ground pins on the PCB
Output current
Total current GND1+2 (pins 26/27)
(total ground current of OUT5,6,9,10,17,18)
Total current GND3+4 (pins 58/59)
(total ground current of OUT1,2,7,8,11,12,15,16)
Total current GND5+6 (pins 11/12)
(total ground current of OUT3,13)
Total current GND7+8 (pins 41/42)
(total ground current of OUT4,14)
Input voltage
Input currents
Minimum reset duration (Power-On)
Input currents
GND1+2
and I
GND3+4
OUT7..18
and I
GND5+6
see 3.4.4 , 3.9.1 , 3.9.2 , 3.9.3 , 3.13.2
-0.3V
43
and I
U
INi,RST,SS,SI,SCK,ABE
GND7+8
I
see 3.4.4
SO
15 ms
must not be exceeded.
5mA
I
I
GND1+2
GND3+4
I
I
GND5+6
GND7+8
2ms
2ms
64V
40V
18 A
20 A
6 A
6 A
36V
TLE 6244X
V4.2, 2003-08-29