CYIL1SM4000-EVAL Cypress Semiconductor Corp, CYIL1SM4000-EVAL Datasheet - Page 16

• Manufacturer Part Number: CYIL1SM4000-EVAL
• Description: BOARD EVAL IMAGE SENS LUPA-4000
• Manufacturer: Cypress Semiconductor Corp

Specifications of CYIL1SM4000-EVAL

• Sensor Type: CMOS Imaging, Monochrome
• Sensing Range: 4 Megapixel
• Interface: SPI
• Sensitivity: 15 fps
• Voltage - Supply: 2.5 V ~ 3.3 V
• Embedded: No
• Utilized Ic / Part: LUPA-4000
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

3.6.1 ADC timing
The ADC converts the pixel data on the falling edge of the A
clock cycles before this pixel data is at the output of the ADC. This pipeline delay is
shown in Figure 6.
3.6.2 Setting of the ADC reference voltages
The internal resistor R
This results in the values for the external resistors:
Contact:
Cypress Semiconductor Corporation
LUPA-4000
Data Sheet
[e-mail]
REF_HIGH ~ 2 V
REF_LOW ~ 1 V
ADC
Figure 7: In- and external ADC connections
has a value of approximately 300 Ω.
Resistor
R
R
R
Document #: 38-05712 Rev.**(Revision 1.2 )
ADC_VHIGH
ADC
ADC_VLOW
R
Figure 6: ADC timing
ADC
3901 North First Street
RHIGH_ADC
2.5V
RLOW_ADC
external
external
internal
Value (Ω)
300
220
75
San Jose, CA 95134
DC_CLOCK
Page 16 of 49
but it takes 2
408-943-2600