101-1050 Rabbit Semiconductor, 101-1050 Datasheet - Page 132

• Manufacturer Part Number: 101-1050
• Description: KIT DEV RABBITCORE RCM3750
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-1050

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3750
• Data Bus Width: 8 bit
• Interface Type: Ethernet
• For Use With/related Products: RCM3750
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-1049; 101-1049; 316-1117; Q2479714; Q2828455

C.5 Install Connectors on Prototyping Board
Before you can use the LCD/keypad module with the RCM3700 Prototyping Board, you
will need to install connectors to attach the LCD/keypad module to the RCM3700 Proto-
typing Board. These connectors are included with the RCM3700 Development Kit.
First solder the 2 x 13 connector to location LCD1JA on the RCM3700 Prototyping Board
as shown in Figure C-7.
• If you plan to bezel-mount the LCD/keypad module, continue with the bezel-mounting
• If you plan to mount the LCD/keypad module directly on the RCM3700 Prototyping
126
instructions in Section C.7, “Bezel-Mount Installation.”
Board, solder two additional 2 x 7 connectors at locations LCD1JB and LCD1JC on the
RCM3700 Prototyping Board. Section C.6, “Mounting LCD/Keypad Module on the
Prototyping Board,” explains how to mount the LCD/keypad module on the RCM3700
Prototyping Board.
Figure C-7. Solder Connectors to RC3700 Prototyping Board
RabbitCore RCM3750