101-1017 Rabbit Semiconductor, 101-1017 Datasheet - Page 19

• Manufacturer Part Number: 101-1017
• Description: KIT DEV POWERCORE 3800 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1017

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.2 Connect Programming Cable
The programming cable connects the PowerCore module to the PC running Dynamic C to
download programs and to monitor the PowerCore module during debugging.
Connect the 10-pin connector of the programming cable labeled
the PowerCore module as shown in Figure 3. There is a small dot on the circuit board next
to pin 1 of header J2. Be sure to orient the marked (usually red) edge of the cable towards
pin 1 of the connector. (Do not use the
ming serial connection.)
Attach the DE9 connector end of the programming cable to a COM (serial) port on the PC.
User’s Manual
NOTE: Be sure to use the programming cable (part number 101-0542) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Tool Kit—the programming cable has blue shrink wrap around the RS-232 converter
section located in the middle of the cable. Programming cables from other Rabbit Semi-
conductor kits might not work with
an RS-232/USB converter (Part No. 540-0070) with the programming cable supplied
with the PowerCore FLEX Development Kit. Note that not all RS-232/USB converters
work with Dynamic C.
Figure 3. Connect Programming Cable and Power Supply
DIAG
PowerCore
connector, which is used for a nonprogram-
modules.
PROG
to header J2 on
11