101-1017 Rabbit Semiconductor, 101-1017 Datasheet - Page 28

• Manufacturer Part Number: 101-1017
• Description: KIT DEV POWERCORE 3800 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: PowerCore FLEXr
• Type: MPU Moduler

Specifications of 101-1017

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: PowerCore 38xx
• Interface Type: Ethernet
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

•
•
20
ADC_MUX_EXTERNAL2.c
external A/D channels randomly in your application program. This sample program
will also read and display the voltage of the external A/D channel that is located on pin
7 of header J3 on the PowerCore Prototyping Board.
Since there is only one A/D converter channel on the Prototyping Board, the MUX con-
trol is simulated by using LED DS5 on the Prototyping Board, which is controlled by
PD5.
The following steps explain how to
selection.
In order to run this sample program, you will need a separate power supply. Connect
the positive lead from the power supply to the A/D channel input located on pin 7 of
header J3 on the Prototyping Board. Connect the negative lead from the power supply
to the GND located on pin 8 of J3 on the Prototyping Board.
ADC_RD_EXTERNAL.c
external A/D converter located on the Prototyping Board. The voltage is calculated
from coefficients read from the simulated EEPROM in flash memory. The external A/D
channel is located on pin 7 of header J3 on the PowerCore Prototyping Board.
In order to run this sample program, you will need a separate power supply. Connect
the positive lead from the power supply to the A/D channel input located on pin 7 of
header J3 on the Prototyping Board. Connect the negative lead from the power supply
to the GND located on pin 8 of J3 on the Prototyping Board.
1. Define the number of A/D channels. Change the default from 1 to the number of A/D channels in
2. Provide an application MUX function that does the following:
3. Add I/O initialization code at the beginning of your application program for the port pins used for
4. Then:
#define MAX_ADCHANNELS <Number Channels>
LED = OFF = A/D channel 0
LED = ON = A/D channel 1.
your design.
• A/D converter channel selection via your hardware MUX circuit.
• Change the _adc_mux_channel index to the channel selected.
• Add delay for the channel switching settling time.
• Set the adc_conversion_done flag to FALSE.
MUX control.
• Call your routine with the A/D converter channel selected.
• Wait in a nonblocking wait routine for the adc_conversion_done flag to become TRUE.
• Read the A/D converter.
• Repeat the sequence.
—Demonstrates how to read and display the voltage of the
—Demonstrates how to implement MUX control to read
implement the MUX routine for random A/D channel
PowerCore FLEX