101-0530 Rabbit Semiconductor, 101-0530 Datasheet - Page 24

• Manufacturer Part Number: 101-0530
• Description: KIT TOOL FOR LP3500 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: Single Board Computers (SBC)r

Specifications of 101-0530

• Contents: Demo Board, Serial Cable, Software and Documentation
• For Use With/related Products: Rabbit 3000-based products, except RCM30/3100, LP3500
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

3.1 LP3500 Pinouts
The LP3500 pinouts are shown in Figure 8.
3.1.1 Headers and Screw Terminals
Standard LP3500 models are equipped with two 1 × 17 headers (J1 and J2) with a pitch of
0.1", one 1 × 25 header (J4) with a pitch of 0.1", and one 1 × 3 screw terminal strip (J8).
The Display Interface (J9) is a 2 × 13 header with a pitch of 0.1", and the Serial Interface
is a 2 mm 2 × 5 socket.
A variety of commercially available connectors with a 0.1" pitch can be used to interface
to the signals on headers J1, J2, and J4, or the Prototyping Board may be used to access
these signals via screw-terminal headers.
18
NOTE: Although header J2 is installed on the LP3510, the associated analog I/O are not
available on the LP3510. The relay screw-terminal header at J8 is also not installed on
the LP3510. The power supply inputs on header J2 are still available.
Figure 8. LP3500 Pinouts
Fox (LP3500)