C8051F360-TB Silicon Laboratories Inc, C8051F360-TB Datasheet - Page 254

• Manufacturer Part Number: C8051F360-TB
• Description: BOARD TARGET/PROTO W/C8051F360
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F360-TB

• Contents: Board
• Processor To Be Evaluated: C8051F36x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F360
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1412

C8051F360/1/2/3/4/5/6/7/8/9
254
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bits 1–0: SCA1–SCA0: Timer 0/1 Prescale Bits.
Bit 7:
Bit 6:
SFR Page:
SFR Address:
T3MH
R/W
Bit7
T3MH: Timer 3 High Byte Clock Select.
This bit selects the clock supplied to the Timer 3 high byte if Timer 3 is configured in split 8-
bit timer mode. T3MH is ignored if Time 3 is in any other mode.
0: Timer 3 high byte uses the clock defined by the T3XCLK bit in TMR3CN.
1: Timer 3 high byte uses the system clock.
T3ML: Timer 3 Low Byte Clock Select.
This bit selects the clock supplied to Timer 3. If Timer 3 is configured in split 8-bit timer
mode, this bit selects the clock supplied to the lower 8-bit timer.
0: Timer 3 low byte uses the clock defined by the T3XCLK bit in TMR3CN.
1: Timer 3 low byte uses the system clock.
T2MH: Timer 2 High Byte Clock Select.
This bit selects the clock supplied to the Timer 2 high byte if Timer 2 is configured in split 8-
bit timer mode. T2MH is ignored if Timer 2 is in any other mode.
0: Timer 2 high byte uses the clock defined by the T2XCLK bit in TMR2CN.
1: Timer 2 high byte uses the system clock.
T2ML: Timer 2 Low Byte Clock Select.
This bit selects the clock supplied to Timer 2. If Timer 2 is configured in split 8-bit timer
mode, this bit selects the clock supplied to the lower 8-bit timer.
0: Timer 2 low byte uses the clock defined by the T2XCLK bit in TMR2CN.
1: Timer 2 low byte uses the system clock.
T1M: Timer 1 Clock Select.
This select the clock source supplied to Timer 1. T1M is ignored when C/T1 is set to
logic ‘1’.
0: Timer 1 uses the clock defined by the prescale bits, SCA1–SCA0.
1: Timer 1 uses the system clock.
T0M: Timer 0 Clock Select.
This bit selects the clock source supplied to Timer 0. T0M is ignored when C/T0 is set to
logic ‘1’.
0: Counter/Timer 0 uses the clock defined by the prescale bits, SCA1–SCA0.
1: Counter/Timer 0 uses the system clock.
These bits control the division of the clock supplied to Timer 0 and/or Timer 1 if configured
to use prescaled clock inputs.
Note: External clock divided by 8 is synchronized with the system clock.
all pages
0x8E
T3ML
SCA1
R/W
Bit6
0
0
1
1
SFR Definition 21.3. CKCON: Clock Control
T2MH
R/W
Bit5
SCA0
0
1
0
1
T2ML
R/W
Bit4
System clock divided by 12
System clock divided by 4
System clock divided by 48
External clock divided by 8
Rev. 1.0
T1M
R/W
Bit3
Prescaled Clock
T0M
R/W
Bit2
SCA1
R/W
Bit1
SCA0
R/W
Bit0
00000000
Reset Value