ST7MDT10-DVP3 STMicroelectronics, ST7MDT10-DVP3 Datasheet - Page 13

• Manufacturer Part Number: ST7MDT10-DVP3
• Description: EMULATOR REAL TIME ST7
• Manufacturer: STMicroelectronics
• Type: Emulatorr

Specifications of ST7MDT10-DVP3

• Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation
• For Use With/related Products: ST7 Flash MCUs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ST7-DVP3 Emulator User Manual
3.1
3.1.1
3.1.2
Parallel port
Your ST7-DVP3 emulator supports the parallel port connection modes listed in
Table 2
Connecting to the parallel port
To connect your ST7-DVP3 emulator to your PC, connect one end of the parallel
cable to your development kit’s 25-pin SUB-D connector (see
the other end of the parallel cable to one of the PC’s parallel ports (LPT1 or LPT2).
Be sure to use the parallel cable provided with your emulator. Using a longer
parallel cable may cause emulator malfunctions. The use of switch boxes between
your PC’s parallel port connector and the emulator is not recommended.
Changing the parallel port set up
Under certain circumstances, you may receive the following error message:
This may mean that the setup of the LPT1 or LPT2 port on your PC is not
compatible with your emulator. To set up the port correctly:
1 Shut down and restart your PC in order to enter the BIOS setup.
2 Follow the messages displayed on the screen and when prompted, press the
3 Select the parallel ports menu. (This may be listed under I/O ports.)
4 Change the Mode of the LPT port that you have chosen for your emulator (i.e.
5 Save your changes and exit the BIOS setup.
In-circuit Communication
"Connection Error (LPT1/LPT2): Interconnection failure.
Verify your input/output cable."
key required to enter the BIOS setup (usually a function key or the ESC key).
either LPT1 or LPT2) to one of the compatible modes listed in
page 13.
1) ECP mode is normally chosen as a default mode as it provides the best perfor-
Configuration
mance.
, for the emulation and the in-circuit communication configurations.
Emulation,
Table 2: Supported parallel port connection modes
Millennium, NT
Windows
Operating
2000, XP
Systems
®
®
98,
®
4,
ECP
SPP, Nibble, Centronics or EPP.
Compatible Parallel Port
1
, Bidirectional, Compatible,
Modes
Figure 6
Connectivity
Table 2
). Connect
13/44
on