HS2140EPI61H Renesas Electronics America, HS2140EPI61H Datasheet - Page 211

• Manufacturer Part Number: HS2140EPI61H
• Description: DEV EMULATOR BASE UNIT H8S/2140
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2140EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2140
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

8.1.7
Selecting [View -> CPU -> Extended Monitor] or clicking the [Extended Monitor] toolbar button displays the
[Extended Monitor] window. This emulator displays the following items.
Table 8.8
Note: In this emulator, the update interval in the [Extended Monitor] window cannot be selected or changed.
[Item] Column
User Standby
User NMI
User Reset
User Wait
User System Voltage
User Cable
Running status
Target Mode
Target Clock
Extended Monitor Function
[Extended Monitor] Window Items
[Value] Column
Displays the status of the standby pin.
Displays the status of the NMI pin.
Displays the status of the reset pin.
Displays the status of the wait pin ("Inactive" is displayed if no corresponding
pins exist).
Displays whether or not the user VCC is equal to or exceeds the value set in
[User VCC Threshold] on the [General] page of the [Configuration Properties]
dialog box.
Displays whether or not the user cable is connected.
Displays the address bus value in the MCU and the status of the CPU while
the user program is running, and the cause of a break while the user program
is halted.
Break = <Cause of break>: Displays the cause of a break.
Address = <Address bus value>:
Displays the address bus value during the user program execution.
Status = <Status of the CPU>: Displays the status of the CPU.
Displays the mode to be input from the user system.
Displays whether or not there is a clock signal to be input from the user
system.
PREFETCH: CPU instruction prefetch cycles
DATA: CPU data access cycles
DTC: Operation of DTC
SLEEP: Sleep mode
STANDBY: Standby mode
WATCH: Watch mode
SUBSLEEP: Subsleep mode
191