HS2140EPI61H Renesas Electronics America, HS2140EPI61H Datasheet - Page 27

• Manufacturer Part Number: HS2140EPI61H
• Description: DEV EMULATOR BASE UNIT H8S/2140
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2140EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2140
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

• Screw the cable head to the socket with the screws provided. Progressively tighten the screws in the sequence
Note: Be careful not to over-tighten the screws as this may result in contact failure on the user system or
2.3.2
Plug the cable body into the emulator, taking care to insert it straight, and push it firmly into place.
2.3.3
Plug the cable body into the cable head on the user system.
User system interface cable head
shown in figure 2.4 until all are ‘finger tight’.
damage the cable head. Where provided, use the ‘solder lugs’ on the QFP socket to provide extra
strength to the emulator/user system connection.
Plugging the User System Interface Cable Body into the Emulator
Plugging the User System Interface Cable Body into the Cable Head
Figure 2.5 Plugging User System Interface Cable Body to Emulator
User system interface cable
Figure 2.4 Sequence of Screw Tightening
1
4
User system interface cable body
3
2
EXT2
EXT1
Emulator
7