AD9518-3/PCBZ Analog Devices Inc, AD9518-3/PCBZ Datasheet - Page 25
![no-image](/images/manufacturer_photos/0/0/57/analog_devices_inc_sml.jpg)
AD9518-3/PCBZ
Manufacturer Part Number
AD9518-3/PCBZ
Description
BOARD EVAL FOR AD9518-3
Manufacturer
Analog Devices Inc
Specifications of AD9518-3/PCBZ
Main Purpose
Timing, Clock Generator
Utilized Ic / Part
AD9518-3
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Clock Distribution or External VCO <1600 MHz
When the external clock source to be distributed or the external
VCO/VCXO is <1600 MHz, a configuration that bypasses the
VCO divider can be used. This only differs from the
High Frequency Clock Distribution—CLK or External VCO
>1600 MHz section in that the VCO divider (divide-by-2/
divide-by-3/divide-by-4/divide-by-5/divide-by-6) is bypassed.
This limits the frequency of the clock source to <1600 MHz
(due to the maximum input frequency allowed at the channel
dividers).
Configuration and Register Settings
For clock distribution applications where the external clock is
<1600 MHz, the register settings shown in Table 24 should be used.
Table 24. Settings for Clock Distribution <1600 MHz
Register
0x10<1:0> = 01b
0x1E1<0> = 1b
0x1E1<1> = 0b
Function
PLL asynchronous power-down (PLL off )
Bypass the VCO divider as source for
distribution section
CLK selected as the source
Rev. 0 | Page 25 of 64
When using the internal PLL with an external VCO <1600 MHz,
the PLL must be turned on.
Table 25. Settings for Using Internal PLL with External VCO
<1600 MHz
Register
0x1E1<0> = 1b
0x10<1:0> = 00b
An external VCO/VCXO requires an external loop filter that
must be connected between CP and the tuning pin of the
VCO/VCXO. This loop filter determines the loop bandwidth
and stability of the PLL. Make sure to select the proper PFD
polarity for the VCO/VCXO being used.
Table 26. Setting the PFD Polarity
Register
0x10<7> = 0
0x10<7> = 1
Function
Bypass the VCO divider as source for
distribution section
PLL normal operation (PLL on) along with
other appropriate PLL settings in 0x10 to 0x1E
Function
PFD polarity positive (higher control
voltage produces higher frequency)
PFD polarity negative (higher control
voltage produces lower frequency)
AD9518-3