ZGP323ICE01ZEM Zilog, ZGP323ICE01ZEM Datasheet - Page 6

• Manufacturer Part Number: ZGP323ICE01ZEM
• Description: PLATFORM DEV ICE Z8 GP ZGP323
• Manufacturer: Zilog

Specifications of ZGP323ICE01ZEM

• Processor To Be Evaluated: ZGP323
• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3399; ZGR323ICE01ZEM

UM017503-0208
Connecting Z8 GP ICE to Target Pod
Connecting Z8 GP ICE to OTP Programming Module (Optional)
After installing the appropriate target pod (and converter, if required) onto the target
development board, connect the Z8 GP ICE to the target pod as follows:
•
•
After developing and debugging your software, follow the steps below to connect the Z8
GP ICE to the OTP programming module so that you can burn your code onto the OTP
chip:
1. Connect the 40-circuit ribbon cable from the Z8 GP ICE OTP Programming connector
2. The 40-PDIP ZIF socket on the OTP programming module is designed to accept 40-
For 40-PDIP target pod:
–
–
For 20-/28-PDIP target pods:
–
to connector P1 on the OTP programmer module.
PDIP OTP chips. The OTP programming adapters supplied with the Z8 GP ICE allow
Connect the 16-circuit cable from P17 on the emulator to P17 on the 40-PDIP tar-
get pod.
Connect the 34-circuit cable from P16 on the emulator to P16 on the 40-PDIP tar-
get pod.
Connect the 34-circuit cable from P16 on the emulator to P16 on the target pod.
(Emulator connector P17 is not used).
20-PDIP
Figure 1. Z8 GP ZGP323 Evaluation Board
Z8 GP
™
ZGP323 In-Circuit Emulator and Development Platform
28-PDIP
User Manual
Introduction
3