M3062PT-EPB Renesas Electronics America, M3062PT-EPB Datasheet - Page 12

• Manufacturer Part Number: M3062PT-EPB
• Description: EMUL PERSONALITY KIT M16C/62P
• Manufacturer: Renesas Electronics America

Specifications of M3062PT-EPB

• Accessory Type: Probe Accessory Kit
• For Use With/related Products: PC7501, M16C/62
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Caution to Be Taken for Modifying This Product:
Cautions to Be Taken for Turning On the Power:
Cautions to Be Taken for Handling This Product:
Caution to Be Taken for Malfunctions:
Caution to Be Taken for External Trigger Input Voltage:
• Do not modify this product. Modifying or disassembling this product will void your warranty.
• Turn on the power of the emulator and target system as simultaneously as possible.
• Turn off the power of the emulator and target system as simultaneously as possible.
• Do not leave either the emulator or target system powered on, because of leakage current the
• When turning on the power again after shutting off the power, wait about 10 seconds.
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the emulator main unit and the target MCU connector pins. Static
• Do not pull this product by the flexible cable for connecting to the emulator main unit and emulation
• Do not flex the flexible cable for connecting to the emulator main unit and emulation probe
• Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO
• If the emulator malfunctions because of interference like external noise, do the following to remedy
• Keep an external trigger input voltage of the emulator main unit less than a Vcc2 voltage.
internal circuits may be damaged.
electricity may damage the internal circuits.
probe. The cable may cause a break.
excessively. The cable may cause a break.
(meter-size) type screws. When replacing screws, use same type screws as equipped before.
the trouble.
Overvoltage may cause damage to the internal circuits.
(1) Press the system reset switch on the emulator front panel.
(2) If normal operation is not restored after step (1), shut OFF power to the emulator once and then
reactivate it.
CAUTION
( 10 / 80 )