HS7727KCI02H Renesas Electronics America, HS7727KCI02H Datasheet - Page 33

• Manufacturer Part Number: HS7727KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7727KCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes: 1. To connect the signals output from the Hitachi-UDI port connector, refer to the
2. To remove the user system interface cable from the user system, pull the tab on
3. The range of frequencies that the Hitachi-UDI operates at is different according
4. Connect the Hitachi-UDI signals from the Hitachi-UDI port connector directly to
5. When developing user systems, do not connect the TDI and TDO signals of the
GND line
Figure 2.4 Connecting the User System Interface Cable to the User System
device pin alignment.
the connector upward.
to the devices used. For details, refer to section 6.5.4, Notes on Using the JTAG
Clock (TCK) and AUD Clock (AUDCK).
the device.
device to the boundary scan loop, or separate them by using a switch (figure 2.5).
User system GND
connection
when the 14-pin Straight Type Connector is Used
User system interface cable
Pin 8
Pin 1
Hitachi-UDI port
connector
User system
Tab
13