HS7760KCM02H Renesas Electronics America, HS7760KCM02H Datasheet - Page 228

• Manufacturer Part Number: HS7760KCM02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7760KCM02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6. Break Condition 1,4 is used as the measurement range in the performance measurement
6.5.3
1. When an odd address is set, the next lowest even address is used.
2. A BREAKPOINT is accomplished by replacing instructions of the specified address.
202
function when (P) is added as shown in figure 6.10. For setting the performance measurement
function, refer to section 6.5.7, SH7760 E10A Emulator Useful Functions. This applies when
the Break Condition is displayed with the BREAKCONDITION_DISPLAY command in the
command-line function. In this case, a break does not occur when Break Condition 1,4 is
satisfied.
Accordingly, it can be set only to the internal RAM area. However, a BREAKPOINT cannot
be set to the following addresses:
In addition, do not perform memory write, BREAKPOINT, or download even if the memory
space can only be written by the MMU.
An address whose memory content is H'003B
An area other than the internal RAM
An instruction in which Break Condition 3 is satisfied
A slot instruction of a delayed branch instruction
Notes on Setting the [Breakpoint] Dialog Box
Figure 6.10 [Condition] Page