PIC16C64A-04/P Microchip Technology, PIC16C64A-04/P Datasheet - Page 104

• Manufacturer Part Number: PIC16C64A-04/P
• Description: IC MCU OTP 2KX14 PWM 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C64A-04/P

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Embedded Interface Type: I2C, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PIC16C64A-04/PR; PIC16C64A-04/PR

PIC16C6X
FIGURE 11-27: OPERATION OF THE I
DS30234D-page 104
IDLE_MODE (7-bit):
if (Addr_match)
RCV_MODE:
if ((SSPBUF=Full) OR (SSPOV = 1))
else
Receive 8-bits in SSPSR;
Set interrupt;
XMIT_MODE:
While ((SSPBUF = Empty) AND (CKP=0)) Hold SCL Low;
Send byte;
Set interrupt;
if ( ACK Received = 1)
else if ( ACK Received = 0) Go back to XMIT_MODE;
IDLE_MODE (10-Bit):
If (High_byte_addr_match AND (R/W = 0))
else if (High_byte_addr_match AND (R/W = 1)
{
}
{
}
{
}
{
else PRIOR_ADDR_MATCH = FALSE;
}
Set SSPOV;
Do not acknowledge;
send ACK = 0;
Set interrupt;
if ((SSPBUF = Full) OR ((SSPOV = 1))
else
if (PRIOR_ADDR_MATCH)
transfer SSPSR
PRIOR_ADDR_MATCH = FALSE;
{
}
{
}
{
}
{
}
{
}
Do not acknowledge;
Set UA = 1;
Send ACK = 0;
While (SSPADD not updated) Hold SCL low;
Clear UA = 0;
Receive Low_addr_byte;
Set interrupt;
Set UA = 1;
If (Low_byte_addr_match)
send ACK = 0;
set XMIT_MODE;
Set SSPOV;
Applicable Devices
61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67
SSPBUF;
Set interrupt;
if (R/W = 1)
else if (R/W = 0) set RCV_MODE;
End of transmission;
Go back to IDLE_MODE;
{
}
2
C MODULE IN IDLE_MODE, RCV_MODE OR XMIT_MODE
PRIOR_ADDR_MATCH = TRUE;
Send ACK = 0;
while (SSPADD not updated) Hold SCL low;
Clear UA = 0;
Set RCV_MODE;
{
}
Send ACK = 0;
set XMIT_MODE;
1997 Microchip Technology Inc.