Z8F012ASB020SG Zilog, Z8F012ASB020SG Datasheet - Page 193

• Manufacturer Part Number: Z8F012ASB020SG
• Description: IC ENCORE XP MCU FLASH 1K 8SOIC
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F012ASB020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 6
• Program Memory Size: 1KB (1K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 16 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (3.9mm Width)
• Processor Series: Z8F012Ax
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z8F04A08100KITG, Z8F04A28100KITG, ZENETSC0100ZACG, ZENETSC0100ZACG, ZUSBOPTSC01ZACG, ZUSBSC00100ZAC, ZUSBSC00100ZACG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4039; Z8F012ASB020SG

PS022825-0908
•
•
•
•
Read Register (09H)—The Read Register command reads data from the Register
File. Data can be read 1–256 bytes at a time (256 bytes can be read by setting size to
0). If the device is not in DEBUG mode or if the Flash Read Protect Option bit is en-
abled, this command returns
DBG
DBG
DBG
DBG
DBG
Write Program Memory (0AH)—The Write Program Memory command writes
data to Program Memory. This command is equivalent to the LDC and LDCI instruc-
tions. Data can be written 1–65536 bytes at a time (65536 bytes can be written by set-
ting size to 0). The on-chip Flash Controller must be written to and unlocked for the
programming operation to occur. If the Flash Controller is not unlocked, the data is
discarded. If the device is not in DEBUG mode or if the Flash Read Protect Option bit
is enabled, the data is discarded.
DBG
DBG
DBG
DBG
DBG
DBG
Read Program Memory (0BH)—The Read Program Memory command reads data
from Program Memory. This command is equivalent to the LDC and LDCI instruc-
tions. Data can be read 1–65536 bytes at a time (65536 bytes can be read by setting
size to 0). If the device is not in DEBUG mode or if the Flash Read Protect Option bit
is enabled, this command returns
DBG
DBG
DBG
DBG
DBG
DBG
Write Data Memory (0CH)—The Write Data Memory command writes data to
Data Memory. This command is equivalent to the LDE and LDEI instructions. Data
can be written 1–65536 bytes at a time (65536 bytes can be written by setting size to
0). If the device is not in DEBUG mode or if the Flash Read Protect Option bit is en-
abled, the data is discarded.
DBG
DBG
DBG
←
←
←
←
→
←
←
←
←
←
←
←
←
←
←
←
→
←
←
←
09H
{4’h0,Register Address[11:8]
Register Address[7:0]
Size[7:0]
1-256 data bytes
0AH
Program Memory Address[15:8]
Program Memory Address[7:0]
Size[15:8]
Size[7:0]
1-65536 data bytes
0BH
Program Memory Address[15:8]
Program Memory Address[7:0]
Size[15:8]
Size[7:0]
1-65536 data bytes
0CH
Data Memory Address[15:8]
Data Memory Address[7:0]
FFH
FFH
for all the data values.
for the data.
Z8 Encore! XP
Product Specification
®
On-Chip Debugger
F082A Series
182