AT91SAM7SE512-AU Atmel, AT91SAM7SE512-AU Datasheet - Page 104

• Manufacturer Part Number: AT91SAM7SE512-AU
• Description: IC ARM7 MCU FLASH 512K 128-LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7SE512-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: EBI/EMI, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 88
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 128-LQFP
• Cpu Family: 91S
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 55MHz
• Interface Type: EBI/SPI/TWI/USART
• Total Internal Ram Size: 32KB
• # I/os (max): 88
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 128
• Package Type: LQFP
• No. Of I/o's: 88
• Ram Memory Size: 32KB
• Cpu Speed: 48MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 4
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7S-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7SE-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM7SE-EK - EVAL BOARD FOR AT91SAM7SEAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

Figure 19-4. Code Read Optimization in Thumb Mode for FWS = 3
Note:
19.2.3
19.2.4
104
ARM Request (16-bit)
Buffer (32 bits)
Data To ARM
Flash Access
Master Clock
When FWS is equal to 2 or 3, in case of sequential reads, the first access takes FWS cycles, the second access one cycle, the
third access FWS cycles, the fourth access one cycle, etc.
Code Fetch
SAM7SE512/256/32 Preliminary
Write Operations
Flash Commands
@Byte 0
3 Wait State Cycles
The internal memory area reserved for the embedded Flash can also be written through a write-
only latch buffer. Write operations take into account only the 8 lowest address bits and thus wrap
around within the internal memory area address space and appear to be repeated 1024 times
within it.
Write operations can be prevented by programming the Memory Protection Unit of the product.
Writing 8-bit and 16-bit data is not allowed and may lead to unpredictable data corruption.
Write operations are performed in the number of wait states equal to the number of wait states
for read operations + 1, except for FWS = 3 (see
The EFC offers a command set to manage programming the memory flash, locking and unlock-
ing lock sectors, consecutive programming and locking, and full Flash erasing.
Table 19-1.
Command
Write page
Set Lock Bit
Write Page and Lock
Clear Lock Bit
Erase all
Set General-purpose NVM Bit
Clear General-purpose NVM Bit
Set Security Bit
Bytes 0-3
Set of Commands
@2
0-1
3 Wait State Cycles
@4
2-3
Bytes 0-3
Bytes 4-7
@6
4-5
3 Wait State Cycles
@8
6-7
“MC Flash Mode Register” on page
Bytes 8-11
Bytes 4-7
Value
0x0B
0x0D
0x0F
0x01
0x02
0x03
0x04
0x08
@10
8-9 10-11
3 Wait State Cycles
@12
Mnemonic
WP
SLB
WPL
CLB
EA
SGPB
CGPB
SSB
Bytes 12-15
6222F–ATARM–14-Jan-11
Bytes 8-11
111).
12-13