ETRX3DVKA357 Telegesis Ltd, ETRX3DVKA357 Datasheet - Page 19

• Manufacturer Part Number: ETRX3DVKA357
• Description: KIT DEVELOPMENT FOR ETRX357
• Manufacturer: Telegesis Ltd
• Type: ZigBit™r

Specifications of ETRX3DVKA357

• Frequency: 2.4GHz
• Kit Contents: 3x ETRX35xDV Development Boards, 3x USB Cables, 2x ETRX35x On Carrier Boards, 2x ETRX35xHR Boards
• Mcu Supported Families: ETRX3
• Silicon Manufacturer: Telegesis
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ETRX357
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 920-1009; ETRX2DVK357

ETRX35x Development Kit
Figure 19. Device Naming
The application software also allows you to add custom command buttons and edit existing
command buttons. New groups of commands can be created and command buttons can be
moved between groups. To learn more about how to do this please refer to the help files of the
Telegesis Terminal Software by selecting Help / Contents.
11.3 A Quick Start
This section gives you a quick introduction on how to get started. Power up the node connected to
the PC and type AT followed by <enter>. If the communication to the module is working the
module will prompt OK, if not check the USB connectivity and driver status and make sure you
have connected to the correct COM port with the correct speed. Please note that even when
connected to the wrong COM port there may be a reply to AT, for example when you are
communicating with your PC’s modem or Bluetooth device. To double check you are actually
communicating with a Telegesis ZigBee device use the ATI command described below.
11.3.1 Select the correct set of buttons
Type ATI<enter> to verify your firmware version (eg R302C). Then select File
Open Layout on
the menu bar and open the R3xx.xml file as appropriate. This attaches the correct set of AT
commands to the buttons. You can create your own button configurations for different situations
and save them as separate files. Telegesis Terminal starts up using the configuration of the
previous session.
©2010 Telegesis (UK) Ltd
- 19 -
ETRX35xDVK Product Manual (Rev 1.01)